Publikationen
2024
Buchbeitrag
Numerical and experimental analysis of elastic three-layer plate under static and low velocity impact loading
Altenbach, Holm; Breslavsky, Dmytro; Konkin, Stanislav; Lysenko, Volodymyr; Naumenko, Konstantin
In: Progress in Structural Mechanics , 1st ed. 2024. - Cham : Springer International Publishing ; Altenbach, Holm, S. 1-18 - ( Advanced structured materials book series; volume 199)
Buchbeitrag
The impact of mesh generation in finite element simulations on stress gradient and calculated fatigue strength
Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin
In: Collaborative Research Advancing Engineering Solutions for Real-World Challenges , 1st ed. 2024. - Cham : Springer Nature Switzerland ; Öchsner, Andreas, S. 111-121
Buchbeitrag
Notch effect under cyclic loading of electrical steel strips
Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin
In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 377-400 - (Advanced structured materials; volume 203)
Begutachteter Zeitschriftenartikel
M-integral for finite anti-plane shear of a nonlinear elastic matrix with rigid inclusions
Eremeyev, Victor A.; Naumenko, Konstantin
In: International journal of engineering science - New York, NY [u.a.] : Science Direct, Bd. 196 (2024), Artikel 104009, insges. 14 S.
2023
Buchbeitrag
Fortgeschrittene Methoden für die Schädigungsanalyse von Glaslaminaten bei dynamischen Beanspruchungen
Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Riedel, Kristin; Würkner, Mathias
In: Glasbau ... ; 2023 - Berlin : Ernst & Sohn ; Weller, Bernhard *195X-*, S. 335-347
Buchbeitrag
Development of a microstructure-based finite element model of thermomechanical Response of a fully metallic composite phase change material
Gariboldi, Elisabetta; Molteni, Matteo; Vargas Vargas, Diego André; Naumenko, Konstantin
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 131-142 - (Advanced structured materials; volume 194)
Buchbeitrag
Various state-of-the-art methods for creep evaluation of power plant components in a wide load and temperature range
Blum, Eike; Kostenko, Yevgen; Naumenko, Konstantin
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 69-82 - (Advanced structured materials; volume 194)
Buchbeitrag
Creep mechanics - some historical remarks and new trends
Altenbach, Holm; Eisenträger, Johanna; Knape, Katharina; Naumenko, Konstantin
In: Creep in Structures VI , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 57-68 - (Advanced structured materials; volume 194)
Begutachteter Zeitschriftenartikel
A penalty method for coupling of finite-element and peridynamic models
Pernatii, Anna; Gabbert, Ulrich; Naumenko, Konstantin; Hesse, Jan-Timo; Willberg, Christian
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 22 (2023), Heft 1, Artikel e202200151, insges. 6 S.
Begutachteter Zeitschriftenartikel
Closed-form series solutions to peridynamic rod equations - influence of kernel function
Naumenko, Konstantin; Yang, Zhenghoa; Ma, Chien-Ching; Chen, Yanguang
In: Technische Mechanik - Magdeburg : Inst., Bd. 43 (2023), Heft 2, S. 259-270
Begutachteter Zeitschriftenartikel
Closed-form analytical solutions for the deflection of elastic beams in a peridynamic framework
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Chen, Yang
In: Applied Sciences - Basel : MDPI, Bd. 13 (2023), Heft 18, Artikel 10025, insges. 20 S.
Begutachteter Zeitschriftenartikel
Peridynamic analysis of curved elastic beams
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: European journal of mechanics / A - Paris : Elsevier, Bd. 101 (2023), Artikel 105075
Herausgeberschaft
Creep in Structures VI - IUTAM Symposium Proceedings
Altenbach, Holm; Naumenko, Konstantin
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XX, 334 p. 184 illus., 143 illus. in color.) - (Advanced Structured Materials; 194), ISBN: 978-3-031-39070-8
Lehrbuch
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: [Heidelberg]: Springer Vieweg, 2023, 1 Online-Ressource (xvi, 581 Seiten, 174 Abb., 53 Abb. in Farbe), ISBN: 978-3-662-68391-0
2022
Buchbeitrag
Preface
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Material modeling and structural mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. vii-xi - (Advanced Structured Materials; 161)
Buchbeitrag
Preface
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Material modeling and structural mechanics - Cham: Springer; Altenbach, Holm *1956-* . - 2022, S. vii-xi
Buchbeitrag
Influence of thermal stabilisation on the thermal regime in the strapdown inertial navigation system
Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Altenbach, Holm
In: Material Modeling and Structural Mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. 177-188 - (Advanced structured materials; volume 161)
Begutachteter Zeitschriftenartikel
Damage patterns in float glass plates - experiments and peridynamics analysis
Naumenko, Konstantin; Pander, Matthias; Würkner, Mathias
In: Theoretical and applied fracture mechanics - Amsterdam: North-Holland, Bd. 118 (2022)
Begutachteter Zeitschriftenartikel
Analytical solution of the peridynamic equation of motion for a 2-dimensional rectangular membrane
Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin; Vazic, Bozo
In: Journal of peridynamics and nonlocal modeling - [Cham]: Springer International Publishing . - 2022, insges. 17 S.
Begutachteter Zeitschriftenartikel
Analytical solution of 1-dimensional peridynamic equation of motion
Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin
In: Journal of peridynamics and nonlocal modeling - [Cham]: Springer International Publishing . - 2022, insges. 19 S.
Begutachteter Zeitschriftenartikel
Elastic plate under low velocity impact: Classical continuum mechanics vs peridynamics analysis
Altenbach, Holm; Larin, Oleksiy; Naumenko, Konstantin; Sukhanova, Olha; Würkner, Mathias
In: AIMS Materials Science - Springfield, Mo.: AIMS Press, Bd. 9 (2022), 5, S. 702-718
Begutachteter Zeitschriftenartikel
Beam buckling analysis in peridynamic framework
Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: Archive of applied mechanics - Berlin : Springer . - 2022, insges. 12 S.
Begutachteter Zeitschriftenartikel
Some analytical solutions to peridynamic beam equations
Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: ZAMM - Berlin : Wiley-VCH, Bd. 102 (2022), Heft 10, Artikel e202200132, insges. 16 S.
Begutachteter Zeitschriftenartikel
Strength analysis of laminated glass/EVA interfaces - microstructure, peel force and energy of adhesion
Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Thavayogarajah, Nishanth; Würkner, Mathias
In: Composite structures - Amsterdam: Elsevier, Bd. 297 (2022)
Begutachteter Zeitschriftenartikel
A non-linear direct peridynamics plate theory
Naumenko, Konstantin; Eremeyev, Victor A.
In: Composite structures - Amsterdam: Elsevier, Bd. 279 (2022)
Begutachteter Zeitschriftenartikel
Some closed form series solutions to peridynamic plate equations
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Altenbach, Holm; Oterkus, Erkan; Oterkus, Selda
In: Mechanics research communications - Amsterdam [u.a.]: Elsevier . - 2022
Dissertation
Identification of non-local force interactions in self-adhesive polymeric films
Bagheri, Behnaz; Naumenko, Konstantin
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (ix, 96 Blätter, 96,02 MB) [Literaturverzeichnis: Blatt 87-96]
Herausgeberschaft
Material Modeling and Structural Mechanics
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Cham: Imprint: Springer, 2022., 1st ed. 2022., 1 Online-Ressource(XXII, 336 p. 163 illus., 131 illus. in color.) - (Springer eBook Collection; Advanced Structured Materials; 161)
2021
Buchbeitrag
Dynamics of curved laminated glass composite panels under impact loading
Sukhanova, Olha; Larin, Oleksiy; Naumenko, Konstantin; Altenbach, Holm
In: Nonlinear Mechanics of Complex Structures - From Theory to Engineering Applications - Cham: Springer International Publishing; Altenbach, Holm . - 2021, S. 91-101 - ( Advanced structured materials; volume 157)
Begutachteter Zeitschriftenartikel
Inelastic behavior of polyoxymethylene for wide strain rate and temperature ranges - constitutive modeling and identification
Filanova, Yevgeniya; Hauptmann, Johannes; Längler, Frank; Naumenko, Konstantin
In: Materials - Basel: MDPI, Bd. 14 (2021), Heft 13, Artikel 3667, insges. 17 S.
Begutachteter Zeitschriftenartikel
Temperature resistance of Mo3Si - phase stability, microhardness, and creep properties
Kauss, Olha; Obert, Susanne; Bogomol, Iurii; Wablat, Thomas; Siemensmeyer, Nils; Naumenko, Konstantin; Krüger, Manja
In: Metals - Basel: MDPI, Bd. 11 (2021), 4, insges. 17 S.
Begutachteter Zeitschriftenartikel
Experimental analysis and constitutive modeling of anisotropic creep damage in a wrought age-hardenable Al alloy
Naumenko, Konstantin; Gariboldi, Elisabetta
In: Engineering fracture mechanics - Kidlington: Elsevier Science . - 2021
Begutachteter Zeitschriftenartikel
Closed-form quaternion representations for rigid body rotation - application to error assessment in orientation algorithms of strapdown inertial navigation systems
Plaksiy, Yuriy; Breslavsky, Dmitriy; Homozkova, Irina; Naumenko, Konstantin
In: Continuum mechanics and thermodynamics - analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, Bd. 33 (2021), Heft 4, S. 1141-1160
2020
Buchbeitrag
Cohesive zone models-theory, numerics and usage in high-temperature applications to describe cracking and delamination
Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2019, S. 131-168, 2020 - (Advanced structured materials; 117)
Buchbeitrag
Laminated plates with non-linear visco-elastic interlayer - the governing equations
Naumenko, Konstantin; Altenbach, Holm
In: Analysis of shells, plates, and beams - Cham: Springer; Altenbach, Holm . - 2020, S. 297-310 - (Advanced structured materials; volume 134)
Buchbeitrag
Heat transfer analysis in the strapdown inertial unit of the navigation system
Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Schastlivets, Kyrill Yu.
In: Plasticity, damage and fracture in advanced materials - Cham: Springer, 2020; Altenbach, Holm . - 2020, S. 119-133
Buchbeitrag
Analysis of a power plant rotor made of tempered martensitic steel based on a composite model of inelastic deformation
Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 1-34 - (Advanced structured materials; 117)
Buchbeitrag
Structural analysis of gas turbine blades made of Mo-Si-B under stationary thermo-mechanical loads
Kauss, Olha; Naumenko, Konstantin; Hasemann, Georg; Krüger, Manja
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 79-91 - (Advanced structured materials; 117)
Begutachteter Zeitschriftenartikel
A direct approach to evaluate interaction forces between self-adhesive polymeric films subjected to T-peeling
Naumenko, Konstantin; Bagheri, Behnaz
In: Archive of applied mechanics - Berlin: Springer, Bd. 91 (2021), S. 629-641
Begutachteter Zeitschriftenartikel
Stress-regime-dependence of inelastic anisotropy in forged age-hardening aluminium alloys at elevated temperature - constitutive modeling, identification and validation
Naumenko, Konstantin; Gariboldi, Elisabetta; Nizinkovskyi, Rostyslav
In: Mechanics of materials: forum for theoretical, experimental and field advances in mechanics of flow, fracture and general constitutive behavior of geophysical, geotechnical and technological materials - Amsterdam: Elsevier, Volume 141(2020), Article 103262
2019
Buchbeitrag
Subclasses of mechanical problems arising from the direct approach for homogeneous Plates
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Recent developments in the theory of shells - Springer International Publishing, S. 43-63, 2019 - (Advanced Structured Materials; 110)
Buchbeitrag
A damage mechanics based cohesive zone model with damage gradient extension for creep-fatigue-interaction
Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm
In: Key engineering materials: KEM - Uetikon a.S.: Trans Tech Publications, 1986, Bd. 794.2019, S. 253-259
Begutachteter Zeitschriftenartikel
The problems of transient heat transfer of electroconductive bodies in the electromagnetic field
Altenbach, Holm; Naumenko, Konstantin; Lavinsky, Denis; Konkin, Valerii
In: Visnyk Nacionalʹnoho techničnoho universytetu "ChPI" - Charkiv: NTU "ChPI", 2001, Bd. 1.2019, 2, S. 9-13, 2020
Begutachteter Zeitschriftenartikel
On thermal strains and residual stresses in the linear theory of antisandwiches
Javanbakht, Z.; Aßmus, Marcus; Naumenko, Konstantin; Öchsner, A.; Altenbach, Holm
In: ZAMM - Berlin: Wiley-VCH, Volume 99, issue 8 (2019), Article e2019000062, insgesamt 17 Seiten
Begutachteter Zeitschriftenartikel
Thermomechanical analysis of a steam turbine rotor
Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.]: Wiley-VCH, Volume 19, issue 1 (2019), article e201900361
Begutachteter Zeitschriftenartikel
Numerical analysis of a steam turbine rotor subjected to thermo-mechanical cyclic loads
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39.2019, 3, S. 261-281
Begutachteter Zeitschriftenartikel
The potential of mechanical alloying to improve the strength and ductility of Mo-9Si-8B-1Zr alloys - experiments and simulation
Krüger, Manja; Kauss, Olha; Naumenko, Konstantin; Burmeister, C.; Wessel, E.; Schmelzer, Janett
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Vol. 113 (2019), Artikel 106558
Begutachteter Zeitschriftenartikel
Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads
Kauss, Olha; Tsybenko, H.; Naumenko, Konstantin; Hütter, Sebastian; Krüger, Manja
In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 165 (2019), S. 129-136
Begutachteter Zeitschriftenartikel
A generalized framework towards structural mechanics of three-layered composite structures
Aßmus, Marcus; Naumenko, Konstantin; Öchsner, Andreas; Eremeyev, Victor; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39 (2019), 2, S. 202-219
Begutachteter Zeitschriftenartikel
Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling
Bagheri, Behnaz; Schulze, Stefan-H.; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 216.2019, S. 222-227
Herausgeberschaft
Advances in mechanics of high-temperature materials
Naumenko, Konstantin; Krüger, Manja
In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 117), ISBN: 978-3-030-23869-8
Wissenschaftliche Monographie
Modeling High Temperature Materials Behavior for Structural Analysis. Part 2: Solution procedures and structural analysis examples
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Springer, 2019, 1 Online-Ressource, Illustrationen - (Advanced structured materials; 112)
2018
Buchbeitrag
Angular velocities, twirls, spins and rotation tensors in the continuum mechanics revisited
Naumenko, Konstantin; Altenbach, Holm
In: Generalized Models and Non-classical Approaches in Complex Materials 1 - Cham: Springer International Publishing, 2018 . - 2018, S. 621-632 - (Advanced Structured Materials; 89)
Begutachteter Zeitschriftenartikel
Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests
Nordmann, Joachim; Thiem, Philipp; Cinca, Nuria; Naumenko, Konstantin; Krüger, Manja
In: The journal of strain analysis for engineering design : JSA - London : Sage Publ., Bd. 53.2018, 4, S. 255-265
Begutachteter Zeitschriftenartikel
Mechanical models and finite-element approaches for the structural analysis of photovoltaic composite structures - a comparative study
Haghi, M.; Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 54 (2018), Heft 4, S. 415-430
Begutachteter Zeitschriftenartikel
Verformungsanalyse elektrisch leitender metallischer Bauteile bei Magnetimpulsbearbeitung
Altenbach, Holm; Konkin, Valery; Lavinsky, Denis; Morachkovsky, Oleg; Naumenko, Konstantin
In: Forschung im Ingenieurwesen - research journal: research journal - Berlin: Springer, 1930 . - 2018[Online first]
Begutachteter Zeitschriftenartikel
Two-time-scales and time-averaging approaches for the analysis of cyclic creep based on ArmstrongFrederick type constitutive model
Altenbach, Holm; Breslavsky, Dmitry; Naumenko, Konstantin; Tatarinova, Oksana
In: Proceedings of the Institution of Mechanical Engineers / C/ Institution of Mechanical Engineers - London: Sage Publ., 1983 . - 2018[Online first]
Begutachteter Zeitschriftenartikel
Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Acta mechanica - Wien: Springer, 1965, Bd. 229.2018, 7, S. 3051-3068
Begutachteter Zeitschriftenartikel
Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 1965, Bd. 53.2018, 3, S. 156-177
Begutachteter Zeitschriftenartikel
Adaption of a Carreau fluid law formulation for residual stress determination in rotary friction welds
Rößler, Christoph; Schmicker, David; Naumenko, Konstantin; Woschke, Elmar
In: Journal of materials processing technology - Amsterdam [u.a.]: Elsevier, Bd. 252.2018, S. 567-572
Dissertation
Modeling inelastic behaviour of Al-rich Ti-Al alloys at ultra-high homologous temperature
Chowdhury, Helal; Naumenko, Konstantin; Krüger, Manja
In: Barleben: docupoint Verlag, 2018, 153 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 30)
Herausgeberschaft
Advances in mechanics of materials and structural analysis - in honor of Reinhold Kienzler
Altenbach, Holm; Jablonski, Frank; Müller, Wolfgang H.; Naumenko, Konstantin; Schneider, Patrick; Kienzler, Reinhold
In: [s.l.]: Springer-Verlag, 2018, 1 Online-Ressource (PDF, 19415 KB, 461 S.), ISBN: 3-319-70562-8
2017
Abstract
Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system
Popovych, Olha; Bogomol, Iurii; Naumenko, Konstantin; Krüger, Manja
In: Konferenz: Intermetallics 2017, Intermetallics 2017 - Bad Staffelstein : Educational Center Kloster Banz, S. 115-116
Buchbeitrag
Fracture mechanics characterisation of peelfilms
Nase, M.; Rennert, M.; Henning, S.; Zankel, A.; Naumenko, Konstantin; Grellmann, W.
In: Deformation and fracture behaviour of polymer materials - Cham: Springer-Verlag, S. 271-281, 2017 - (Springer series in material science; 247)
Buchbeitrag
Prediction of stress relaxation in power plant components based on a constitutive model
Kostenko, Yevgen; Naumenko, Konstantin
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines - New York, N.Y: American Society of Mechanical Engineers, 2017, Paper No. GT2017-63608, S. V008T29A017, insgesamt 8 S.[Konferenz: ASME Turbo Expo 2017, Charlotte, North Carolina, USA, 26-30 June, 2017]
Buchbeitrag
Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln
Popovych, Olha; Naumenko, Konstantin; Krüger, Manja
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017 , korrigierte Auflage - Magdeburg : Universitätsbibliothek, S. 185-192
Buchbeitrag
Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures
Aßmus, Marcus; Bergmann, Stefan; Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Mechanics for materials and technologies - Cham, Switzerland : Springer International Publishing ; Altenbach, Holm *1956-* . - 2017, S. 73-122 - (Advanced structured materials; Volume 46)
Buchbeitrag
On the models of three-layered plates and shells with thin soft core
Eremeyev, Viktor. A.; Naumenko, Konstantin
In: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials - Singapore : Springer , 2017, S. 159-171 - (Advanced Structured Materials; 59)
Begutachteter Zeitschriftenartikel
Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 700.2017, S. 503-511
Begutachteter Zeitschriftenartikel
Mechanical behaviour of photovoltaic composite structures - influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Composites communications - Amsterdam : Elsevier, Bd. 6.2017, S. 59-62
Begutachteter Zeitschriftenartikel
A homogeneous substitute material for the core layer of photovoltaic composite structures
Aßmus, Marcus; Nordmann, J.; Naumenko, Konstantin; Altenbach, Holm
In: Composites / B - Amsterdam [u.a.]: Elsevier, 1996, Bd. 112.2017, S. 353-372
Begutachteter Zeitschriftenartikel
Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Archive of applied mechanics - Berlin: Springer, insges. 17 S., 2017
Begutachteter Zeitschriftenartikel
Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading
Aßmus, Marcus; Bergmann, Stefan; Naumenko, Konstantin; Altenbach, Holm
In: Composites communications - Amsterdam : Elsevier, Bd. 5.2017, S. 23-26
Begutachteter Zeitschriftenartikel
Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
Chowdhury, Helal; Altenbach, Holm; Krüger, Manja; Naumenko, Konstantin
In: Mechanics of advanced materials and modern processes - Berlin: Springer, 2015, Bd. 3.2017, insges. 20 S.
Begutachteter Zeitschriftenartikel
A layer-wise theory of shallow shells with thin soft core for laminated glass and photovoltaic applications
Naumenko, Konstantin; Eremeyev, Viktor A.
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 178.2017, S. 434-446
Begutachteter Zeitschriftenartikel
Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery
Chowdhury, H.; Naumenko, Konstantin; Altenbach, Holm
In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 146-147 (2018), S. 486-496
Begutachteter Zeitschriftenartikel
Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Gariboldi, Elisabetta
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 2017
Rezension
[Rezension von: Bobaru, Florin, Handbook of Peridynamic Modeling]
Naumenko, Konstantin; Bobaru, Florin
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 97.2017, 5, S. 616
2016
Begutachteter Zeitschriftenartikel
A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 158.2016, S. 340-358
Begutachteter Zeitschriftenartikel
Analysis of anisotropic damage in forged Al-Cu-Mg-Si alloy based on creep tests, micrographs of fractured specimen and digital image correlations
Gariboldi, Elisabetta; Naumenko, Konstantin; Ozhoga-Maslovskaja, Oksana; Zappa, Emanuele
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 652.2016, S. 175-185
Begutachteter Zeitschriftenartikel
Identifying tractionseparation behavior of self-adhesive polymeric films from in situ digital images under T-peeling
Nase, Michael; Rennert, Mirko; Naumenko, Konstantin; Eremeyev, Victor A.
In: Journal of the mechanics and physics of solids - Amsterdam [u.a.]: Elsevier Science, Bd. 91.2016, S. 40-55
Begutachteter Zeitschriftenartikel
On the choice of the power law flow rule and its consequences in crystal plasticity
Chowdhury, Helal; Altenbach, Holm; Naumenko, Konstantin
In: Key engineering materials - Aedermannsdorf: Trans Tech Publ, Bd. 725.2016, S. 359-365
Herausgeberschaft
Advanced Methods of Continuum Mechanics for Materials and Structures
Naumenko, Konstantin; Aßmus, Marcus
In: Singapore: Springer Singapore, 2016, Online-Ressource (XVII, 558 p. 194 illus., 118 illus. in color, online resource) - (Advanced Structured Materials; 60; SpringerLink; Bücher), ISBN: 978-981-10-0959-4
Herausgeberschaft
Advanced Methods of Continuum Mechanics for Materials and Structures
Naumenko, Konstantin; Aßmus, Marcus
In: Singapore: Springer Singapore, 2016, 1 Online-Ressource (555 p) - (Advanced Structured Materials; 60), ISBN: 978-981-10-0959-4
Lehrbuch
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: Heidelberg: Springer Vieweg, 2016, Online-Ressource (XIX, 531 S. 167 Abb. in Farbe, online resource) - (SpringerLink; Bücher), ISBN: 978-3-662-47230-9
Lehrbuch
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: Heidelberg: Springer Vieweg, 2016, 1 Online-Ressource (XIX, 531 Seiten), ISBN: 978-3-662-47230-9
Wissenschaftliche Monographie
Modeling High Temperature Materials Behavior for Structural Analysis - Part I: Continuum Mechanics Foundations and Constitutive Models
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Imprint: Springer, 2016, Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color, online resource) - (Advanced Structured Materials; 28; SpringerLink; Bücher), ISBN: 978-3-319-31627-7
Wissenschaftliche Monographie
Modeling high temperature materials behavior for structural analysis - part I: continuum mechanics foundations and constitutive models
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Imprint: Springer, 2016, 1 Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color) - (Advanced Structured Materials; 28), ISBN: 978-3-319-31627-7
Nicht begutachteter Zeitschriftenartikel
Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen
Altenbach, Holm; Naumenko, Konstantin
In: Rundbrief// Gesellschaft für Angewandte Mathematik und Mechanik, GAMM - Dresden: GAMM, 2, S. 4-10, 2016
2015
Buchbeitrag
Approximate rules for calculation of notch stresses considering plasticity and creep
Altenbach, Holm; Eisenträger, Johanna; Naumenko, Konstantin
In: Plastic behavior of conventional and advanced materials: theory, experiment, and modeling: proceedings of Plasticity'15: the twenty first International Symposium on Plasticity and its Current Applications / editor: Akhtar S. Khan: proceedings of Plasticity'15: the twenty first International Symposium on Plasticity and its Current Applications/ International Symposium on Plasticity and its Current Applications - Fulton, Maryland, USA: NEAT Press, S. 124-126, 2015Kongress: PLASTICITY' 15 21 (Montego Bay, Jamaica : 2015.01.04-09)
Buchbeitrag
Creep behavior modeling of polyoxymethylene (POM) applying rheological models
Altenbach, Holm; Girchenko, Anna; Kutschke, Andreas; Naumenko, Konstantin
In: Inelastic behavior of materials and structures under monotonic and cyclic loading - Heidelberg [u.a.]: Springer, S. 1-5, 2015 - (Advanced structured materials; 57)
Buchbeitrag
Analysis of inelastic behavior for high temperature materials and structures
Naumenko, Konstantin; Altenbach, Holm
In: From Creep Damage Mechanics to Homogenization Methods - Cham: Springer; Altenbach, Holm *1956-* . - 2015, S. 241-298 - (Advanced structured materials; 64)
Begutachteter Zeitschriftenartikel
Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Köppe, Heinz
In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 96-97 (2015), S. 163-171
Begutachteter Zeitschriftenartikel
Inelastic deformation of conductive bodies in electromagnetic fields
Altenbach, Holm; Morachkovsky, Oleg; Naumenko, Konstantin; Lavinsky, Denis
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 28 (2016), Heft 5, S. 1421-1433
Begutachteter Zeitschriftenartikel
On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer
Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 95.2015, 10, S. 1004-1011
Begutachteter Zeitschriftenartikel
A relationship between effective work of adhesion and peel force for thin hyperelastic films undergoing large deformation
Eremeyev, Victor; Naumenko, Konstantin
In: Mechanics research communications - Amsterdam [u.a.]: Elsevier, Bd. 69.2015, S. 24-26
Begutachteter Zeitschriftenartikel
Analysis of casting materials under thermal fatigue
Altenbach, Holm; Laengler, Frank; Naumenko, Konstantin; Ievdokymov, Mykola
In: Applied mechanics and materials: AMM - [S.l.]: Scientific.Net, Bd. 784.2015, S. 95-103
Begutachteter Zeitschriftenartikel
A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory
Eisenträger, J.; Naumenko, Konstantin; Altenbach, Holm; Meenen, J.
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 133.2015, S. 265-277
Begutachteter Zeitschriftenartikel
Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band
Altenbach, Holm; Naumenko, Konstantin; Lvov, G.; Sukiasov, V.; Podgorny, A.
In: Mechanics of composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1965, Bd. 51.2015, 2, S. 139-156
Begutachteter Zeitschriftenartikel
Experimental identification of flow properties of a S355 structural steel for hot deformation processes
Schmicker, David; Paczulla, Stefan; Nitzschke, Steffen; Groschopp, Sven; Naumenko, Konstantin; Jüttner, Sven; Strackeljan, Jens
In: The journal of strain analysis for engineering design - London : Sage Publ., Bd. 50 (2015), Heft 2, S. 75-83
Begutachteter Zeitschriftenartikel
Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading
Ozhoga-Maslovskaja, Oksana; Naumenko, Konstantin; Altenbach, Holm; Prygorniev, Oleksandr
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science; Vol. 96.2015, Part A, S. 178-184
Dissertation
Statistical analysis of stress and deformation state in polycrystalline aggregates with a large number of grains
Prygorniev, Oleksandr; Naumenko, Konstantin
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015, VII, 117 S., Ill., graph. Darst.
2014
Buchbeitrag
Constitutive models for creep-damage behavior at quasi-static and cyclic loading
Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin
In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity '14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08
Begutachteter Zeitschriftenartikel
Homogenisation approach in analysis of creep behaviour in multipass weld
Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm
In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53
Begutachteter Zeitschriftenartikel
A layer-wise theory for laminated glass and photovoltaic panels
Naumenko, Konstantin; Eremeyev, Victor A.
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 112.2014, S. 283-291
Begutachteter Zeitschriftenartikel
A phase mixture model for anisotropic creep of forged AlCuMgSi alloy
Naumenko, Konstantin; Gariboldi, Elisabetta
In: Materials science and engineering / A. - Amsterdam : Elsevier, Bd. 618.2014, S. 368-376
Begutachteter Zeitschriftenartikel
Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff
Altenbach, Holm; Beschetnikov, Dmitriy A.; Lvov, Gennadiy I.; Naumenko, Konstantin; Sukiasov, Vladimir G.
In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67
Begutachteter Zeitschriftenartikel
A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading
Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428
2013
Abstract
Analysis of laminates for photovoltaic appliacations
Naumenko, Konstantin; Weps, Matthias; Eremeyev, Victor; Altenbach, Holm
In: 8th German-Greek-Polish Symposium on recent advances in mechanics. - Univ. of Bremen, S. 59-60, 2013Kongress: German-Greek-Polish Symposium on recent advances mechanics; 8 (Goslar) : 2013.09.09-13
Abstract
A material model for describing the anomalous ratcheting effect of advanced chromium steels
Kutschke, Andreas; Naumenko, Konstantin; Altenbach, Holm
In: CanCNSM 2013. - Montréal, insges. 2 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Buchbeitrag
Robust methods for creep fatigue analysis of power plant components under cyclic transient thermal loading
Kostenko, Yevgen; Almstedt, Henning; Naumenko, Konstantin; Linn, Stefan; Scholz, Alfred
In: Proceedings of the ASME Turbo Expo 2013, Volume 5B: Oil and gas applications; steam turbines . - New York, N.Y : ASME, insges. 8 S.
Buchbeitrag
Ein robuster Ansatz zur Simulation des kontinuierlich angetriebenen Rotationsreibschweißprozesses
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 9 S., 2013Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26
Buchbeitrag
Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang
In: Effizienz, Präzision, Qualität - 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU: 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU - Magdeburg: Univ., 2013, Paper B2-5, insgesamt 10 S.Kongress: Magdeburger Maschinenbau-Tage 11 (Magdeburg : 2013.09.25-26)
Begutachteter Zeitschriftenartikel
A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: Computer methods in applied mechanics and engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 265.2013, S. 186-194
Begutachteter Zeitschriftenartikel
Modeling creep damage of an aluminumsilicon eutectic alloy
Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin
In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, Bd. 22.2013, 5, S. 683-698
Begutachteter Zeitschriftenartikel
Unsymmetric three-layer laminate with soft core for photovoltaic modules
Weps, Matthias; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339
Begutachteter Zeitschriftenartikel
Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen
Eisenträger, Joahanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80
Begutachteter Zeitschriftenartikel
Micro-macro analysis of creep and damage behavior of multi-pass welds
Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm
In: Problemy mašinostroenija. - Kiev : Izd. "Naukova Dumka", Bd. 16.2013, 1, S. 31-38
Artikel in Kongressband
Surface layer effects in polycrystalline structures under cyclic viscoplasticity
Prygorniev, Oleksandr; Naumenko, Konstantin
In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Artikel in Kongressband
A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers
Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola
In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Artikel in Kongressband
A holistic approach on the simulation of rotary-friction-welding
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: The 7th Asia-Pacific International IIW Congress. - Singapore, insges. 6 S., 2013Kongress: Asia-Pacific International IIW Congress on Recent Development in Welding and Joining Technologies; 7 (Singapore) : 2013.07.08-10[vollständiger Beitrag auf CD-ROM]
2012
Buchbeitrag
Modeling creep ratcheting of an aluminum-silicon eutectic alloy
Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin
In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31
Buchbeitrag
Creep fatigue analysis of power plant components under transient thermal loading
Kutschke, Andreas; Linn, Stefan; Naumenko, Konstantin; Scholz, Alfred
In: Creep and fracture of engineering materials and structures. - the Japan Inst. of Metals, insges. 4 S., 2012Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11); 12 (Kyoto, Japan) : 2012.05.27-31
Buchbeitrag
Creep deformation characteristics of Al-rich Ti-Al alloys
Sturm, Daniel; Heilmaier, Martin; Naumenko, Konstantin; Kozhar, Sergii; Krüger, Manja
In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012 . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)
Originalartikel in begutachteter internationaler Zeitschrift
Analysis of laminated glass beams for photovoltaic applications
Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Altenbach, Holm
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036
2011
Originalartikel in begutachteter internationaler Zeitschrift
Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature
Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas
In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208
Originalartikel in begutachteter internationaler Zeitschrift
Multi-axial thermo-mechanical analysis of power plant components from 9–12% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering Fracture Mechanics
Originalartikel in begutachteter internationaler Zeitschrift
Multi-axial thermo-mechanical analysis of power plant components from 9-12% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Originalartikel in begutachteter internationaler Zeitschrift
Multi-axial thermo-mechanical analysis of power plant components from 912% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Originalartikel in begutachteter internationaler Zeitschrift
A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature
Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas
In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597
Originalartikel in begutachteter internationaler Zeitschrift
Conservation laws and prediction methods for stress concentration fields
Altenbach, Holm; Eremeyev, Victor A.; Kutschke, Andreas; Naumenko, Konstantin
In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355
Originalartikel in begutachteter zeitschriftenartiger Reihe
A variationally consistent derivation of microcontinuum theories
Meenen, Johannes; Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)
Originalartikel in begutachteter zeitschriftenartiger Reihe
Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Girchenko, Anna; Altenbach, Holm
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)
2010
Konferenz/Aufsatz
Stress range dependent creep and damage - experimentel observations and their phenomenological description
Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin
In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 55-57
Konferenz/Aufsatz
Modelling of low cycle fatigue for an aluminum alloy at elevated temperature
Altenbach, Holm; Naumenko, Konstantin; Kozhar, Sergii
In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 22-24
2009
Artikel in Zeitschrift
Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results
Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 45.2009, 3, S. 249-256
Artikel in Zeitschrift
Creep analysis of power plant components from 1% CRMOV and 10% CRMOV steels
Kostenko, Y.; Schwass, G.; Naumenko, Konstantin
In: OMMI. - Leatherhead, Surrey : European Technology Development, Bd. 6.2009, 2, S. 1-10
Artikel in Zeitschrift
Structural analysis of a power plant component using a stress-range-dependent creep-damage constitutive model
Naumenko, Konstantin; Kostenko, Y
In: Materials science & engineering. - Amsterdam [u.a.] : ElsevierMaterials science and engineering / A, Bd. 510/511.2009, S. 169-174
Artikel in Zeitschrift
Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov
Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 45.2009, 3, S. 367-378
Artikel in Zeitschrift
Creep analysis with a stress range dependent constitutive model
Naumenko, Konstantin; Altenbach, Holm; Gorash, Yevgen
In: Archive of applied mechanics. - Berlin : Springer, Bd. 79.2009, S. 619-630
Artikel in Zeitschrift
Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis
Altenbach, Holm; Brigadnov, Igor A.; Naumenko, Konstantin
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 10, S. 823-832
Konferenz/Aufsatz
Creep analysis for a wide stress range based on stress relaxation experiments
Altenbach, Holm; Naumenko, Konstantin; Gorash, Yevgen
In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008. - Singapore [u.a.] : World Scientific, S. 41-46, 2009
Konferenz/Aufsatz
Modeling of stress range dependent creep and damage for the structural analysis
Naumenko, Konstantin; Altenbach, Holm
In: Creep & fracture in high temperature components. - Lancaster, Pa. : DEStech Publ., S. 974-984, 2009
2008
Artikel in Zeitschrift
Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile
Sukiasov, Vladimir; Altenbach, Holm; Naumenko, Konstantin
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 72.2008, S. 183-191
Artikel in Zeitschrift
Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges
Altenbach, Holm; Gorash, Yevgen; Naumenko, Konstantin
In: Acta mechanica. - Wien : Springer, Bd. 195.2008, S. 263-274
Konferenz/Aufsatz
Numerische Zeitstandanalyse einer Kraftwerkskomponente mit einem Kriechschädigungs-Werkstoffmodell
Kostenko, Yevgen; Naumenko, Konstantin
In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. - Düsseldorf : VDEh, S. 37-46, 2008
Monografiebeitrag
Fiber rotation motion in homogeneous flows
Altenbach, Holm; Naumenko, Konstantin; Renner, Barbara
In: Micro-macro-interactions. - Berlin [u.a.] : Springer, S. 133-142, 2008
2007
Artikel in Zeitschrift
Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergeii; Renner, Barbara
In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 87 (2007), Heft 2, S. 81-93
Artikel in Zeitschrift
Numerical benchmarks for creep-damage modeling
Altenbach, Holm; Naumenko, Konstantin; Gorash, Yegvgen
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 7 (2007), S. 4040021-4040022
Monografie
Modeling of creep for structural analysis - with 5 tables
Naumenko, Konstantin; Altenbach, Holm
In: New York: Springer, 2007, Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications, XII, 220 S. - (Foundations of engineering mechanics), ISBN: 978-3-540-70834-6 [Literaturverz. S. 199 - 214]
Monografiebeitrag
Long term creep analysis of pipe bends in a steam transfer line at elevated temperature
Altenbach, Holm; Naumenko, Konstantin
In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2 - Stafa-Zürich [u.a.] : Trans Tech Publ. . - 2007, S. 795-802
2006
Artikel in Zeitschrift
Ausrichtung von Partikeln in stationären Strömungsfeldern
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 6 (2006), S. 423-424
Artikel in Zeitschrift
A note on transversely-isotropic invariants
Altenbach, Holm; Naumenko, Konstantin
In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 86 (2006), Heft 2, S. 162-168
Artikel in Zeitschrift
Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen
Radusch, Hans-Joachim; Kies, Torsten; Altenbach, Holm; Naumenko, Konstantin
In: Zeitschrift Kunststofftechnik - München : Hanser, Bd. 2 (2006), Heft 6, S. 1-21
Artikel in Zeitschrift
Steady-state creep analysis of pressurized pipe weldments by perturbation method
Shutov, A. V.; Altenbach, Holm; Naumenko, Konstantin
In: International journal of solids and structures - New York, NY [u.a.] : Elsevier, Bd. 43 (2006), S. 6908-6920
Artikel in Zeitschrift
On the free particle rotation in a polymer melt
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara
In: Strojnícky časopis - Bratislava : [Verlag nicht ermittelbar], Bd. 57 (2006), Heft 2, S. 112-126
Habilitation
Modeling of high-temperature creep for structural analysis applications
Naumenko, Konstantin
In: Halle Univ., FB Ingenieurwiss., Habil.-Schr., 2006, Online-Ressource, Text + Image
Konferenz/Aufsatz
Power plant component design using creep-damage analysis
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of 2006 ASME International Mechanical Engineering Congress & Exposition - New York : ASME, S. 1-10
Konferenz/Aufsatz
Creep modeling and long term structural analysis of plates and shells
Altenbach, Holm; Naumenko, Konstantin
In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity & viscoplasticity, and metal forming ; proceedings of Plasticity '06, the Twelfth International Symposium on Plasticity and its Current Applications - Fulton, Md. : NEAT Press . - 2006, S. 580-582
2005
Artikel in Zeitschrift
Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva
Altenbach, Holm; Naumenko, Konstantin
In: Vestnik Nacional'nogo Techniceskogo Universiteta "ChPI". - Char'kov : Univ., 2005, S. 57-66
Artikel in Zeitschrift
On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics
Altenbach, Holm; Naumenko, Konstantin
In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339
Artikel in Zeitschrift
A phenomenological model for anisotropic creep in a multipass weld metal
Naumenko, Konstantin; Altenbach, Holm
In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819
Artikel in Zeitschrift
Numerical treatment of finite rotation for a cylindrical particle
Renner, Barbara; Altenbach, Holm; Naumenko, Konstantin
In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161
Konferenz/Aufsatz
Modelling of anisotropic creep in a multi-pass weld metal
Altenbach, Holm; Naumenko, Konstantin
In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387
Monografiebeitrag
A direct approach to the formulation of constitutive equations for rods and shells
Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.
In: Shell structures. - London [u.a.] : Taylor & Francis, 2005, S. 87-90
2004
Artikel in Zeitschrift
Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten
Naumenko, Konstantin; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228
Artikel in Zeitschrift
Edge effects in moderately thick plates under creep damage conditions
Altenbach, Johannes; Altenbach, Holm; Naumenko, Konstantin
In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263
Konferenz/Aufsatz
Shell and solid type finite element analysis of creep in thin-walled structures
Naumenko, Konstantin; Altenbach, Holm
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176
Konferenz/Aufsatz
Boundary layer in a moderately thick plates under creep-damage conditions
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of the 2004 International Conference on Computational & Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116
2003
Artikel in Zeitschrift
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov
Altenbach, Holm; Naumenko, Konstantin
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352
Artikel in Zeitschrift
Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung
Altenbach, Holm; Dyogtyev, Oleksandr; Naumenko, Konstantin
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213
Artikel in Zeitschrift
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics
Altenbach, Holm; Naumenko, Konstantin
In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234
Artikel in Zeitschrift
A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions
Altenbach, Holm; Naumenko, Konstantin
In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570
Konferenz/Aufsatz
On the predictions of fiber orientation and elastic properties of injection molded-walled parts
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21
Konferenz/Aufsatz
A micro-polar theory for binary media with application to flow of fiber suspensions
Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.
In: Proceedings of the XXX Summer School "Advanced Problems in Mechanics", APM '2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62