TECHNISCHE MECHANIK

Scientific Journal for Fundamentals and Applications of Engineering Mechanics
Wissenschaftliche Zeitschrift für Grundlagen und Anwendungen der Technischen Mechanik   


Table of Contents / Jahresinhaltsverzeichnis  

Volume/Band 37   (2017)

 

 

issue/page
Heft/Seite

 

A. Battista, D. Del Vescovo,
N. L. Rizzi,  E. Turco:

Frequency Shifts in Natural Vibrations in Pantographic Metamaterials under Biaxial Tests

1/1

V. Rizov:

Mode II Delamination Analysis of Asymmetrical Four Point Bend Layered Beams with Considering Material Non-linearity

1/18

O. Gehrmann, N. H. Kröger,
P. Erren, D. Juhre:
Estimation of the Compression Modulus of a Technical Rubber via Cyclic Volumetric Compression Tests

1/28

J. Voges, R. Makvandi, D. Juhre:

Numerical Investigation of the Phase Evolution in Polymer Blends under External Mechanical Loadings

1/37

V. Rizov:

Lengthwise Fracture of Two-Dimensional Functionally Graded Non-Linear Elastic Beam

1/48

L. Spannan, C. Daniel,
E. Woschke:
Experimental Study on the Velocity Dependent Drag Coefficient and
Friction in an Automatic Ball Balancer

1/62

B. Paswan, S. A. Sahu,
P. K. Saroj:

Dynamic Response of Heterogeneity and Reinforcement on the Propagation of Torsional Surface Waves

1/69

M. A. Kraus,
M. Niederwald:

Generalized Collocation Method using Stiffness Matrices in the Context of
the Theory of Linear Viscoelasticity (GUSTL)

1/82

 

SIRM 2017     Vorwort / Preface 

2-5/107

B. Pfau, R. Markert:

A two-lobe Journal Bearing with adjustable Gap Geometry for Vibration Reduction of flexible Rotors

2-5/109

S. Rother, M. Beitelschmidt:

Strength Assessment of a Precession Driven Dynamo

2-5/120

A. Burov, E. Shalimova:

Bifurcations of Relative Equilibria Sets of a Massive Point on Rough Rotating Surfaces

2-5/129

A. Marn, F. Schönleitner,
M. Mayr, F. Heitmeir:

Comparison of Numerical Forced Response Predictions with Experimental Results Obtained in a Subsonic Test Turbine Facility

2-5/139

L. Quurck, M. Richter,
M. Schneider, D.Franz,
S. Rinderknecht:

Design and practical Realization of an innovative Flywheel Concept for industrial Applications

2-5/151

C. Zahalka, K. Ellermann:

Determining a Function for the Damping Coefficient of a laminated Stack

2-5/161

N. Norrick, S. Neeb:

Calculation of Torsional Vibrations and Prediction of Print Quality in Sheetfed Offset Printing Presses

2-5/171

S. Nitzschke, E. Woschke,
C. Daniel:

Dynamic Behaviour of EHD-contacts using a regularised, mass conserving Cavitation Algorithm

2-5/181

F. Schönleitner, T. Selic,
M. Zenz, F. Heitmeir,
A. Marn:

On the Influence of a Five-Hole-Probe on the Vibration Characteristics of a Low Pressure Turbine Rotor while Performing Aerodynamic Measurements

2-5/196

T. Pumhössel, B. Hopfner,
H. Ecker:

Enhanced Utilization of structural Damping of rotating Machines using impulsively shaped torsional Moments

2-5/208

S. Haas, K. Ellermann:

Development and Analysis of radial Force Waves in electrical rotating Machines

2-5/218

R. Hoffmann, C. Kayo,
R. Liebich:

Experimental Analysis of the nonlinear Vibrations of a rigid Rotor in Gas Foil Bearings

2-5/226

U. Werner:

Influence of electromagnetic Field Damping on the Vibration Stability of soft mounted Induction Motors with Sleeve Bearings, based on a Multibody Model

2-5/239

G. Mikota:

Modal Analysis of Rotors under Special Support Conditions

2-5/250

A. Hartung,
H.-P. Hackenberg, U. Retze:

More Flexible Damping Systems for Blades and Vanes

2-5/258

T. Szolc:

On Dynamics and Stability of the Automotive Engine Turbocharger Rotor Supported by the Electrodynamic Passive Magnetic Bearings

2-5/268

T. Leister, C. Baum,
W. Seemann:

On the Importance of Frictional Energy Dissipation in the Prevention of Undesirable Self-Excited Vibrations in Gas Foil Bearing Rotor Systems

2-5/280

S. von Osmanski,
J. S. Larsen,
I. F. Santos:

On the Incorporation of Friction Into a Simultaneously Coupled Time Domain Model of a Rigid Rotor Supported by Air Foil Bearings

2-5/291

Z. Racic, M. Racic:

Practical Approach for Solving Vibrations of Large Turbine and Generator Rotors - Reconciling the Discord between Theory and Practice

2-5/303

S. Willeke,
L. Panning-von Scheidt,
J. Wallaschek:

Reduced Order Modeling of Mistuned Bladed Disks under Rotation

2-5/314

M. Clappier, L. Gaul:

Rotordynamic Computation of a
Permanent-Magnetic excited Synchronous Machine due to Electromagnetic Force Excitation

2-5/326

G. Zywica, P. Baginski,
J. Kicinski:

Selected operational Problems of high-speed Rotors supported by Gas Foil Bearings

2-5/339

T. P. Holopainen, A. Arkkio:

Simple Electromagnetic Motor Model for Torsional Analysis of Variable Speed Drives with an Induction Motor

2-5/347

C. Wagner, W. Tsunoda,
O. Matsushita, T. Berninger, T. Thümmel , D. Rixen
:

Prediction of Instability in Rotor-Seal Systems using Forward Whirl
Magnetic Bearing Excitation

2-5/358

S. Neeb, N. Norrick:

Stability Analysis of parameter-excited linear Vibration Systems with Time Delay, using the Example of a Sheetfed Offset Printing Press

2-5/367

J. Zapomel, P. Ferfecki:

Study of the Influence of a Delayed Yielding Phenomenon in Magnetorheological Damping Devices on the Vibration Attenuation of a Jeffcott Rotor

2-5/377

F. Boy, H. Hetzler:

The Effect of Field Damping on Rotordynamics of Non-salient Pole Generators

2-5/384

E. Shalimova, L. Klimina,
K.-H. Lin:

On Behavior of a Double Rotor HAWT with a Differential Planet Gear

2-5/394

G. Nowald, R. Schmoll,
B. Schweizer:

Transient Run-Up Simulations of Rotors in Journal Bearings Considering Mass-Conserving Cavitation Approaches

2-5/400

S. Bukovnik, G. Offner,
A. Diemath, L. Smolik:

Turbocharger Dynamic Analysis: Advanced Design Simulation in Time Domain Using CFD Predicted Thermal Boundary Conditions

2-5/409

N. Mokhtari, M. Grzeszkowski, C. Guhmann:

Vibration Signal Analysis for the Lifetime-Prediction and Failure Detection of Future Turbofan Components

2-5/422

A. Boyaci, W. Seemann:

Vibro-acoustical Behavior of a Turbocharger Housing Excited by Oil-film Induced Rotor Oscillations

2-5/432

L. Spannan, C. Daniel,
E. Woschke:

Run-up Simulation of Automatic Balanced Rotors Considering Velocity-dependent Drag Coefficients

2-5/442

A. Krinner, W. Tsunoda,
C. Wagner, T. Berninger,
T. Thummel, D. Rixen:

Simulation and Experimental Validation of a Misaligned Rotor in Journal Bearings using Different Levels of Detail

2-5/450

 

SIRM 2017 complete issue (62 MB)

 

 

 

Technische Mechanik digital