Ausgewählte
Veröffentlichungen
|
A. Bertram: Elasticity and Plasticity of Large Deformations, ca. 343 Seiten, Springer-Verlag, Berlin, |
|
S. Forest, A. Bertram: Formulations of strain gradient plasticity. In: Mechanics of Generalized Continua. Hrg.: H. Altenbach, G. A. Maugin, V. Erofeev, Springer, Berlin, 137-149 (2011) |
|
M. Schurig, A. Bertram: The torsional buckling of a cruciform column under compressive load with a vertex plasticity model. Int. J. Solids Structures 48, 1-11 (2011) |
|
J. Kalisch, A. Bertram: On the evolution of the crystallographic texture of cubic polycrystals in coaxial processes. Int. J. Mater. Form, 3,1, 57-60 (2010) |
|
T. Hoffmann, J. Kalisch, A. Bertram, S. Shim, J. Z. Tischler, H. Bei, B. C. Larson: Experimental identification and validation of models in micro and macro plasticity.Technische Mechanik 30,1-3, 136 – 145 (2010) |
|
A. K. Nallathambi, Y. Kaymak, E. Specht, A. Bertram: Sensitivity of material properties on distortion and residual stresses during metal quensching processes. Journal of Materials Processing Techn. 210, 204-211 (2010) |
| Y. Schneider, A.Bertram, T. Böhlke, C. Hartig: Plastic deformation behaviour of Fe–Cu composites predicted by 3D finite element simulations, Computational Materials Science 48 (2010) 456–465 |
|
R. Glüge, A. Bertram, T. Böhlke, E. Specht: A pseudoelastic model for mechanical twinning on the microscale,. ZAMM 90,7-8, 1-30 (2010) / DOI 10.1002/zamm.200900339 |
| V. Schulze, A. Bertram, T. Böhlke, A. Krawietz: Texture-Based Modeling of Sheet Metal Forming and Springback, Technische Mechanik, 2009, 29,2, 135-159 |
|
R. Glüge, A. Bertram, T. Böhlke: A Pseudoelastic Model for Mechanical Twinning on the Microscale, Preprint Nr. 1/2009 der Fakultät für Maschinenbau der Otto von Guericke-Universität Magdeburg |
|
A. Bertram, J. Tomas (Edts.): Micro-Macro-Interactions in Structured Media and Particle Systems. Springer (2008) |
|
T. Böhlke, G.
Risy, A. Bertram: Eine mikromechanische Interpretation der v.
Mises-Hill´schen Fließbedingung. |
|
A. Bertram:
Elasticity and Plasticity of Large Deformations, ca. 340
Seiten, Springer-Verlag, Berlin, |
|
T. Böhlke, G. Risy, A. Bertram: A micro-mechanically based quadratic yield condition for textured polychristals, ZAMM 88,5, 379-387 (2008) |
|
A. Bertram, S. Forest: Mechanics based on an Objective Power Functional. Techn. Mechanik 27,1, 1-17 (2007) |
|
R. Pietzsch, M. Brzoza, Y. Kaymak, E. Specht, A. Bertram: Simulation of the distortion of long steel profiles during cooling. Journal of Applied Mechanics 74,3, 427-437 (2007) |
|
M. Schurig, A. Bertram, H. Petryk: Micromechanical analysis of the development of a yield vertex in polycrystal plasticity. Acta Mechanica 194, 141-158 (2007), http://www.springerlink.com/content/g2223231n7687108/fulltext.pdf |
|
A. Bertram, T. Böhlke, M. Silhavy: On the rank 1 convexity of stored energy functions of physically linear stress-strain relations.Journal of Elasticity 86, 235-243 (2007) |
|
T. Böhlke, G. Risy, A. Bertram: Finite element simulation of metal forming operations with texture based material models. Mod. Sim. Mat. Sci. Engn 14, 365-387 (2006) |
|
T. Böhlke, G. Risy, A. Bertram: A texture based model for polycrystal plasticity.Materials Schience Forum 495-497, 1091-1096 (2005) ICOTOM 14 |
|
R. Pietzsch, M. Brzoza, Y. Kaymak, E. Specht, A. Bertram: Minimizing the distortion of steel profiles by controlled cooling. Steel Research Int., 399-407 (2005) |
|
T. Kletschkowski, U. Schomburg, A. Bertram: A rate-dependent endochronic approach to thermoplastic materials: temperature and filler volume fraction dependence.Mechanics of Materials 37,6, 687-704 (2005) |
|
T. Böhlke, G. Risy, A. Bertram: A texture component model for anisotropic polycrystal plasticity.Computational Materials Science 32, 284-293 (2005) |
|
A. Bertam, B. Svendsen: Reply to Rivlin's Material symmetry revisid or Much Ado About Nothing, GAMM-Mitt. 27, No. 1, 88 - 93 (2004) |
|
A. Bertram: Finite thermoplasticity based on isomorphisms, Int. J. Plast. 19, 2027-2050 (2003) |
|
A. Bertam, T. Böhlke, Y. Estrin, W. Lenz: Effect of Geometric Nonlinearity on large Stain Deformation: a Case Study, Proceeding of the 9th International Conference on the Mechanical Behaviour of Materials (ICM9), Genf 2003 |
| M. Schurig, A. Bertram: A rate independent approach to crystal plasticity with a power law, Computational Materials Science 26 (2003), 154-158, preprint |
|
A. Bertram, B. Svendsen: On material objectivity and reduced constitutive equations, Archives of Mechanics 53,6, 653-675 (2001) |
| T. Böhlke, C. Brüggemann: Graphical Representation of the Generalized Hooke's Law, Technische Mechanik, 21(2), 145-158 (2001) |
| T. Böhlke, A. Bertram: Bounds for the geometric mean of 4th-order elasticity tensors with cubic symmetry, ZAMM, 2001, 81, S2, S333-S334 |
| T. Böhlke, A. Bertram: The 4th-order isotropic tensor function of a symmetric 2nd-oder tensor with applications to anisotropic elasto-plasticity, ZAMM, 2001, 81, S1, S125-S128 |
| T. Böhlke, A. Bertram: The evolution of Hooke's law due to texture development in polycrystals, Int. J. Sol. Struct. 2001, 38(52), 9437-9459 |
| T. Böhlke, A. Bertram: A minimum problem defining effective isotropic elastic properties, ZAMM, 2000, 80, S2, S419-S420 |
| A. Bertram, T. Böhlke, N. Gaffke, B. Heiligers, R. Offinger: On the generation of discrete isotropic orientation distributions for linear elastic crystals, J. Elast. 2000, 58, 233-248 |
| T. Böhlke, A. Bertram: Isotropic orientation distributions of cubic crystals, J. Mech. Phys. Solids 2001, 49(11), 2459-2470 |
| M. Schurig, O.Bode: Development of a Flaw Tolerant Enhanced safe life concept for Composite Parts in Turbo-Engines, Techn.Mech. 19 (1999) |
| A. Bertram, T. Böhlke: Simulation of texture induced elastic anisotropy of polycrystalline copper, Computational Materials Science 16,2-9(1999) |
| A. Bertram: An alternative approach to finite plasticity based on material isomorphisms, Int. J. Plast. 15 (3), 353-374 (1999) |
| T. Böhlke, A. Bertram: An isotropy condition for discrete sets of cubic single crystals, ZAMM 79, S447-448 (1999) |
| B. Svendson, A. Bertram: On frame-indifference and form-invariance in constitutive theory, Acta Mech. 132, 195-207 (1999) |
| W. Qi, A. Bertram: Anisotropic continuum damage modelling for F.C.C.-single crystals at high temperatures, Int. J. Plasticity 15(11), (1999) |
| W. Qi, A. Bertram: Damage Modeling of the single crystal superalloy SRR99 under monotonous creep, Computational Material Science 13, 132-141 (1999) |
|
A. Bertram: An alternative approach to finite plasticity, Report IFME 98/3, Otto-von-Guericke-Universität Magdeburg (1998) |
| A. Bertram, T. Böhlke, M. Kraska: Texture Development of Aluminum Polycrystals Under Finite Plastic Deformations, IUTAM-Symposium Micro- and Macrostructural Aspects of Thermoplasticity, Bruhns, O.T. and Stein, E. (Eds.), Kluwer Academic Publishers, 127-136 (1998) |
| Koczyk, S.; Lenz, W.; Fritzsche, G.; Rabold, F. Beseitigung technologisch bedingter Eigenspannungen in Litzen und Drahtseilen durch Rollenrichtgeräte, Draht 2/98, S. 140-145 |
| A. Bertram, J. Olschewski: Anisotropic Creep Modelling of the Single Crystal Superalloy SRR99, Comp. Mat. Sci. 5, 12-16 (1996) |
| A. Bertram, M. Kraska: Determination of Finite Plastic Deformations in Single Crystals, Archives of Mechanics 47, 2, 203-222 (1995) |
| A. Bertram, J. Han, J. Olschewski, H.-G. Sockel: Identification of Elastic Constants and Orientation of Single Crystals by Resonance Measurements and FE-Analysis, Special Issue of Int. J. Computer Appl. in Techn., 7, 3/4, 284-291 (1994) |
| A. Bertram: Axiomatische Einführung in die Kontinuumsmechanik, BI-Wissenschaftsverlag. Mannheim, Wien, Zürich (1989) (beim Autor erhältlich) |
| A. Bertram: Thermo-mechanical Constitutive Equations for the Description of Shape Memory Effects in Alloys, Nuclear Engng. Design, 74, 173 - 182 (1982) |
|
A. Bertram: Material Systems - a Framework for the Description of Material Behavior, Arch. Rat. Mech. Anal., 80.2, 99 - 133 (1982) |
letzte Änderung: 25.04.2012 |