http://www.uni-magdeburg.de/search

Prof. Altenbach

Prof. Dr.-Ing. habil. Holm Altenbach

Fakultät für Maschinenbau (FMB)
Institut für Mechanik (IFME)
Gebäude 10, Universitätsplatz 2, 39106, Magdeburg, Gebäude 10, Raum 058
Tel.: +49 391 67 58814
Fax: +49 391 67 42863

Prof. Dr.-Ing. habil. Holm Altenbach

Fakultät für Maschinenbau (FMB)
Institut für Mechanik (IFME)
Gebäude 10, Universitätsplatz 2, 39106, Magdeburg, Gebäude 10, Raum 058
Tel.: +49 391 67 58814
Fax: +49 391 67 42863
Projekte

Aktuelle Projekte

Abgeschlossene Projekte

Publikationen

2017

Begutachteter Zeitschriftenartikel
Altenbach, Holm;  Eremeyev, Victor A. 

On the elastic plates and shells with residual surface stresses
In: Procedia IUTAM - Amsterdam [u.a.]: Elsevier, Bd. 21.2017, S. 25-32; http://dx.doi.org/10.1016/j.piutam.2017.03.033

Aßmus, Marcus;  Nordmann, J.;  Naumenko, Konstantin;  Altenbach, Holm 

A homogeneous substitute material for the core layer of photovoltaic composite structures
In: Composites / B: an international journal - Amsterdam [u.a.]: Elsevier, Bd. 112.2017, S. 353-372; http://dx.doi.org/10.1016/j.compositesb.2016.12.042

Aßmus, Marcus;  Bergmann, S.;  Naumenko, Konstantin;  Altenbach, Holm 

Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading
In: Composites communications - Amsterdam: Elsevier, Bd. 5.2017, S. 23-26; http://dx.doi.org/10.1016/j.coco.2017.06.003

Aßmus, Marcus;  Eisenträger, Johanna;  Altenbach, Holm 

Projector representation of isotropic linear elastic material laws for directed surfaces
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, 2017; http://dx.doi.org/10.1002/zamm.201700122

Burlayenko, V. N.;  Altenbach, Holm;  Sadowski, Tomasz;  Dimitrova, S. D.;  Bhaskar, A. 

Modelling functionally graded materials in heat transfer and thermal stress analysis by means of graded finite elements
In: Applied mathematical modelling: simulation and computation for engineering and environmental systems - Amsterdam [u.a.]: Elsevier Science, Bd. 45.2017, S. 422-438; http://dx.doi.org/10.1016/j.apm.2017.01.005

Chowdhury, H.;  Naumenko, Konstantin;  Altenbach, Holm 

Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, 2017; http://dx.doi.org/10.1016/j.ijmecsci.2017.06.019

Chowdhury, Helal;  Naumenko, Konstantin;  Altenbach, Holm;  Krüger, Manja 

Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
In: Archive of applied mechanics: (Ingenieur-Archiv) - Berlin: Springer, insges. 17 S., 2017; http://dx.doi.org/10.1007/s00419-017-1291-4

Chowdhury, Helal;  Naumenko, Konstantin;  Altenbach, Holm;  Krüger, Manja 

Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
In: Materials science and engineering / A - Amsterdam: Elsevier, Bd. 700.2017, S. 503-511; http://dx.doi.org/10.1016/j.msea.2017.06.041

Chowdhury, Helal;  Altenbach, Holm;  Krüger, Manja;  Naumenko, Konstantin 

Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
In: Mechanics of advanced materials and modern processes - Berlin: Springer, Bd. 3.2017, insges. 20 S.; http://dx.doi.org/10.1186/s40759-017-0031-3

Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm;  Gariboldi, Elisabetta 

Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ, 2017; http://dx.doi.org/10.1177/0309324717699746

Lychev, Sergei;  Altenbach, Holm 

Growing solids and thin-walled structures
In: Procedia IUTAM - Amsterdam [u.a.]: Elsevier, Bd. 23.2017, S. 13-32; http://dx.doi.org/10.1016/j.piutam.2017.06.002

Nazarenko, Lidiia;  Stolarski, Henryk;  Altenbach, Holm 

A definition of equivalent inhomogeneity applicable to various interphase models and various shapes of inhomogeneity
In: Procedia IUTAM - Amsterdam [u.a.]: Elsevier, Bd. 21.2017, S. 63-70; http://dx.doi.org/10.1016/j.piutam.2017.03.038

Nazarenko, Lidiia;  Stolarski, Henryk;  Altenbach, Holm 

Thermo-elastic properties of random particulate nano-materials for various models of interphase
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, Bd. 126.2017, S. 130-141; http://dx.doi.org/10.1016/j.ijmecsci.2017.03.021

Buchbeitrag
Aßmus, Marcus;  Bergmann, Stefan;  Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm 

Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures
In: Mechanics for materials and technologies - Cham, Switzerland: Springer International Publishing, S. 73-122, 2017 - (Advanced structured materials; Volume 46); http://dx.doi.org/10.1007/978-3-319-56050-2_4

Eremeyev, Victor;  Altenbach, Holm 

Basics of mechanics of micropolar shells
In: Shell-like structures: advanced theories and applications - Cham: Springer International Publishing, S. 63-111, 2017 - (CISM International Centre for Mechanical Sciences, Courses and Lectures; 572); http://dx.doi.org/10.1007/978-3-319-42277-0_2

Eremeyev, Victor;  Altenbach, Holm 

Thin-walled structural elements - classification, classical and advanced theories, new applications
In: Shell-like structures: advanced theories and applications - Cham: Springer International Publishing, S. 1-62, 2017 - (CISM International Centre for Mechanical Sciences, Courses and Lectures; 572); http://dx.doi.org/10.1007/978-3-319-42277-0_1

Kostyrko, Sergey;  Altenbach, Holm;  Grekov, Mikhail 

Stress concentration in ultra-thin coating with undulated surface profile
In: Coupled Problems in Science and Engineering VII - COUPLED PROBLEMS 2017: proceedings of the VII International Conference on Coupled Problems in Science and Engineering, Rhodes Island, Greece, June 12-14, 2017 - Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE), S. 1183-1192; http://congress.cimne.com/coupled2017/frontal/Doc/Ebook2017.pdf ; [Konferenz: VII International Conference on Coupled Problems in Science and Engineering, Rhodes Island, Greece, June 12-14, 2017]

Dissertation
Renner, Barbara;  Altenbach, Holm [AkademischeR BetreuerIn] 

Rotation suspendierter axialsymmetrischer Partikel unter Berücksichtigung der Partikel-Medium-Wechselwirkung
In: Magdeburg, 2017, XII, 94, A-8 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 91-94]

Herausgeberschaft
Altenbach, Holm [HerausgeberIn];  Eremeyev, Victor [HerausgeberIn] 

Shell-like structures - advanced theories and applications
In: Cham s.l. Springer International Publishing Imprint: Springer 2017, 1 Online-Ressource (VII, 288 p. 72 illus., 20 illus. in color) - (CISM International Centre for Mechanical Sciences, Courses and Lectures; 572); http://dx.doi.org/10.1007/978-3-319-42277-0, ISBN 978-3-319-42277-0

Holm, Altenbach [HerausgeberIn];  Goldstein, Robert V. [HerausgeberIn];  Murashkin, Evgenii [HerausgeberIn] 

Mechanics for materials and technologies
In: Cham, Switzerland Springer International Publishing 2017, 1 Online-Ressource - (Advanced structured materials; Volume 46); http://dx.doi.org/10.1007/978-3-319-56050-2, ISBN 978-3-319-56050-2 ; [Literaturangaben]

Öchsner, Andreas [HerausgeberIn];  Silva, Lucas F. M. [HerausgeberIn];  Altenbach, Holm [HerausgeberIn] 

Advanced structured materials
In: Berlin Heidelberg Springer, 2017

Öchsner, Andreas [HerausgeberIn];  Altenbach, Holm [HerausgeberIn] 

Properties and characterization of modern materials
In: Singapore Springer Science+Business Media, 2017, x, 452 Seiten, Illustrationen, Diagramme, 24 cm - (Advanced structured materials; Volume 33), ISBN 978-981-10-1601-1 ; [Literaturangaben]

Öchsner, Andreas [HerausgeberIn];  Altenbach, Holm [HerausgeberIn] 

Properties and Characterization of Modern Materials
In: Singapore s.l. Springer Singapore Imprint: Springer 2017, 1 Online-Ressource (X, 452 p. 339 illus., 222 illus. in color) - (Advanced Structured Materials; 33); http://dx.doi.org/10.1007/978-981-10-1602-8, ISBN 978-981-10-1602-8 ; [Description based upon print version of record]

2016

Anderes Material
Altenbach, Holm;  Naumenko, Konstantin 

Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen
In: Rundbrief// Gesellschaft für Angewandte Mathematik und Mechanik, GAMM - Dresden: GAMM, 2, S. 4-10, 2016

Altenbach, Holm;  Lvov, G.;  Naumenko, Konstantin;  Okorokov, V. 

Consideration of damage in the analysis of autofrettage of thick-walled pressure vessels
In: Proceedings of the Institution of Mechanical Engineers / C. - London : Sage Publ, Bd. 230.2016, 20, S. 3585-3593

Begutachteter Zeitschriftenartikel
Aßmus, Marcus;  Naumenko, Konstantin;  Altenbach, Holm 

A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 158.2016, S. 340-358; http://dx.doi.org/10.1016/j.compstruct.2016.09.036

Berinskii, Igor;  Altenbach, Holm 

In-plane and out-of-plane elastic properties of two-dimensional single crystal
In: Acta mechanica - Wien: Springer, insges. 9 S., 2016; http://dx.doi.org/10.1007/s00707-016-1732-0

Chowdhury, Helal;  Altenbach, Holm;  Naumenko, Konstantin 

On the choice of the power law flow rule and its consequences in crystal plasticity
In: Key engineering materials - Aedermannsdorf: Trans Tech Publ, Bd. 725.2016, S. 359-365

Janousch, Christoph;  Winkler, Rolf;  Merkel, Markus;  Altenbach, Holm;  Öchsner, Andreas 

On the isotropic and anisotropic thermal conductivity of metallic hollow sphere structures
In: Proceedings of the Institution of Mechanical Engineers / L. - London : Sage Publ, Bd. 230.2016, 3, S. 789-798

Kolupaev, V. A.;  Yu, M.-H.;  Altenbach, Holm 

Fitting of the strength hypotheses
In: Acta mechanica - Wien: Springer, 2016; http://dx.doi.org/10.1007/s00707-016-1566-9

Nazarenko, Lidiia;  Stolarski, Henryk;  Altenbach, Holm 

A model of cylindrical inhomogeneity with spring layer interphase and its application to analysis of short-fiber composites
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 160.2016, S. 635-652; http://dx.doi.org/10.1016/j.compstruct.2016.10.024

Nazarenko, Lidiia;  Stolarski, Henryk;  Altenbach, Holm 

Effective properties of short-fiber composites with Gurtin-Murdoch model of interphase
In: International journal of solids and structures. - New York, NY [u.a.] : Elsevier, Bd. 97/98.2016, S. 75-88

Sheydakov, Denis N.;  Altenbach, Holm 

Stability of inhomogeneous micropolar cylindrical tube subject to combined loads
In: Mathematics and mechanics of solids. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 21.2016, 9, S. 1082-1094

Tibba, Getachew Shunki;  Altenbach, Holm 

Modelling creep behaviour of superheater materials
In: Energy procedia. - Amsterdam [u.a.] : Elsevier, Bd. 93.2016, S. 197-202

Wolff, Michael;  Böhm, Michael;  Altenbach, Holm 

Application of the Müller-Liu entropy principle to gradient-damage models in the thermo-elastic case
In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, 2016

Buchbeitrag
Altenbach, Holm;  Eremeyev, Victor A. 

On strain rate tensors and constitutive equations of inelastic micropolar materials
In: Altenbach, Holm: : Generalized continua as models for classical and advanced materials. - Springer International Publishing, S. 1-13, 2016 - (Advanced Structured Materials; 42)

Lurie, Sergey;  Belov, Petr;  Altenbach, Holm 

Classification of gradient adhesion theories across length scale
In: Altenbach, Holm: : Generalized continua as models for classical and advanced materials. - Springer International Publishing, S. 261-277, 2016 - (Advanced Structured Materials; 42)

Mikhasev, Gennadi;  Mlechka, Ihnat;  Altenbach, Holm 

Soft suppression of traveling localized vibrations in medium-length thin sandwich-like cylindrical shells containing magnetorheological layers via nonstationary magnetic field
In: Dynamical Systems: Theoretical and Experimental Analysis : Łódź, Poland, December 7-10, 2015. - Cham : Springer International Publishing, S. 241-260, 2016 - (Springer Proceedings in Mathematics & Statistics; 182)

Herausgeberschaft
Altenbach, Holm;  Forrest, Samuel [HerausgeberIn] 

Generalized continua as models for classical and advanced materials
In: Springer International Publishing, 2016; 1 Online-Ressurce (XII, 457 Seiten) - (Advanced Structured Materials; 42)

Altenbach, Holm;  Forest, Samuel 

Generalized Continua as Models for Classical and Advanced Materials
In: Cham: s.l.: Springer International Publishing: Imprint: Springer: 2016, 1 Online-Ressource (XII, 457 p. 104 illus., 48 illus. in color) - (Advanced Structured Materials; 42), ISBN: 978-3-319-31721-2 ; ; [Description based upon print version of record]

Altenbach, Holm [HerausgeberIn];  Forest, Samuel [HerausgeberIn] 

Generalized continua as models for classical and advanced materials
In: Switzerland: Springer International Publishing, 2016; xii, 457 Seiten: Illustrationen, Diagramme; 24 cm - (Advanced structured materials; Volume 42), ISBN 978-3-319-31719-9 ; [Literaturangaben]

Altenbach, Holm [HerausgeberIn];  Forest, Samuel [HerausgeberIn] 

Generalized Continua as Models for Classical and Advanced Materials
In: Cham s.l. Springer International Publishing Imprint: Springer 2016, 1 Online-Ressource (XII, 457 p. 104 illus., 48 illus. in color) - (Advanced Structured Materials; 42); http://dx.doi.org/10.1007/978-3-319-31721-2, ISBN 978-3-319-31721-2 ; [Description based upon print version of record]

Öchsner, Andreas [HerausgeberIn];  Altenbach, Holm [HerausgeberIn] 

Machining, joining and modifications of advanced materials
In: Singapore: Imprint: Springer, 2016; 1 Online-Ressource (VIII, 269 p. 173 illus., 138 illus. in color) - (Advanced Structured Materials; 61), ISBN 978-981-10-1082-8

Lehrbuch
Altenbach, Holm;  Altenbach, Johannes;  Naumenko, Konstantin 

Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
In: Berlin Heidelberg Springer Vieweg, 2016, 1 Online-Ressource (XIX, 531 Seiten), 167 Illustrationen; http://dx.doi.org/10.1007/978-3-662-47230-9, ISBN 978-3-662-47230-9

Altenbach, Holm 

Holzmann/Meyer/Schumpich Technische Mechanik Festigkeitslehre
In: Wiesbaden: Springer Vieweg, 2016, 12., verbesserte und erweiterte Auflage; 1 Online-Ressource (XII, 420 Seiten): 270 Illustrationen, ISBN 978-3-658-14723-5

Wissenschaftliche Monographie
Naumenko, Konstantin;  Altenbach, Holm 

Modeling high temperature materials behavior for structural analysis. Part I: continuum mechanics foundations and constitutive models
In: Springer International Publishing, 2016, 1 Online-Ressource (XIII, 371 Seiten), Illustrationen - (Advanced structured materials; 28); http://dx.doi.org/10.1007/978-3-319-31629-1, ISBN 978-3-319-31627-7 ; [Description based upon print version of record]

2015

Begutachteter Zeitschriftenartikel
Altenbach, H.;  Naumenko, K.;  L’  vov, G.;  Sukiasov, V.;  Podgorny, A. 

Prediction of Accumulation of Technological Stresses in a Pipeline Upon its Repair by a Composite Band
In: Mechanics of Composite Materials, 2015, S. 139-156, ISSN 1573-8922, 10.1007/s11029-015-9485-8

Altenbach, H.;  Naumenko, K.;  L’  vov, G.;  Sukiasov, V.;  Podgorny, A. 

Prediction of Accumulation of Technological Stresses in a Pipeline Upon its Repair by a Composite Band
In: Mechanics of Composite Materials, 2015, S. 139-156, ISSN 0191-5665, 10.1007/s11029-015-9485-8

Altenbach, Holm;  Laengler, Frank;  Naumenko, Konstantin;  Ievdokymov, Mykola 

Analysis of casting materials under thermal fatigue
In: Applied mechanics and materials : AMM. - [S.l.] : Scientific.Net, Bd. 784.2015, S. 95-103

Altenbach, Holm;  Morachkovsky, Oleg;  Naumenko, Konstantin;  Lavinsky, Denis 

Inelastic deformation of conductive bodies in electromagnetic fields
In: Continuum mechanics and thermodynamics: analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, insges. 13 S., 2015; http://dx.doi.org/10.1007/s00161-015-0484-8

Altenbach, Holm;  Eremeyev, Victor 

On the constitutive equations of viscoelastic micropolar plates and shells of differential type
In: Mathematics and mechanics of complex systems - Dell\'Aquila: Mathematical Science Publ, Bd. 3.2015, 3, S. 273-283; http://dx.doi.org/10.2140/memocs.2015.3.273

Altenbach, Holm;  Eremeyev, Victor;  Naumenko, Konstantin 

On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer
In: ZAMM : journal of applied mathematics and mechanics. - Berlin : Wiley-VCH, Bd. 95.2015, 10, S. 1004-1011

Altenbach, Holm;  Naumenko, Konstantin;  Lvov, G.;  Sukiasov, V.;  Podgorny, A. 

Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band
In: Mechanics of composite materials. - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 51.2015, 2, S. 139-156

Burlayenko, Vyacheslav;  Altenbach, Holm;  Sadowski, Tomasz 

An evaluation of displacement-based finite element models used for free vibration analysis of homogeneous and composite plates
In: Journal of sound and vibration. - London : Academic Press, Bd. 358.2015, S. 152-175

Burlayenko, Vyacheslav;  Altenbach, Holm;  Sadowski, Tomasz;  Dimitrova, Svetlana 

Computational simulations of thermal shock cracking by the virtual crack closure technique in a functionally graded plate
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science, 2015

Eisenträger, J.;  Naumenko, Konstantin;  Altenbach, Holm;  Meenen, J. 

A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 133.2015, S. 265-277; http://dx.doi.org/10.1016/j.compstruct.2015.07.049

Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm;  Köppe, Heinz 

Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels
In: International journal of mechanical sciences. - Amsterdam [u.a.] : Elsevier Science, 2015

Ozhoga-Maslovskaja, Oksana;  Naumenko, Konstantin;  Altenbach, Holm;  Prygorniev, Oleksandr 

Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science; Vol. 96.2015, Part A, S. 178-184

Buchbeitrag
Altenbach, Holm;  Eisenträger, Johanna;  Naumenko, Konstantin 

Approximate rules for calculation of notch stresses considering plasticity and creep
In: Plastic behavior of conventional and advanced materials : theory, experiment, andmodeling ; proceedings of PLASTICITY\' 15: the twenty first International Symposium on Plasticity and its Current Applications. - Fulton, Md. : NEAT Press, S. 124-126, 2015 ; Kongress: PLASTICITY\' 15; 21 (Montego Bay, Jamaica) : 2015.01.04-09

Altenbach, Holm;  Kolupaev, Vladimir 

Classical and non-lassical failure criteria
In: Failure and Damage Analysis of Advanced Materials. - Wien [u.a.] : Springer, S. 1-66, 2015 - (CISM International Centre for Mechanical Sciences; 560)

Altenbach, Holm;  Girchenko, Anna;  Kutschke, Andreas;  Naumenko, Konstantin 

Creep behavior modeling of polyoxymethylene (POM) applying rheological models
In: Inelastic behavior of materials and structures under monotonic and cyclic loading. - Heidelberg [u.a.] : Springer, S. 1-5, 2015 - (Advanced structured materials; 57)

Altenbach, Holm;  Eremeyev, Victor 

On the theories of plates and shells at the nanoscale
In: Shell and Membrane theories in mechanics and biology : from macro- to nanoscale structures. - Heidelberg [u.a.] : Springer, S. 25-57, 2015 - (Advanced structured materials; 45)

Eremeyev, Victor;  Altenbach, Holm 

On the direct approach in the theory of second gradient plates
In: Shell and Membrane theories in mechanics and biology : from macro- to nanoscale structures. - Heidelberg [u.a.] : Springer, S. 147-154, 2015 - (Advanced structured materials; 45)

Naumenko, Konstantin;  Altenbach, Holm 

Analysis of inelastic behavior for high temperature materials and structures
In: From creep damage mechanics to homogenization methods : a liber amicorum to celebrate the birthday of Nobutada Ohno, S. 241-298, 2015 - (Advanced structured materials; 64)

Dissertation
Fischer, Walter;  Altenbach, Holm [Gutachter] 

Modellierung und Berechnung von mechanischen Spannungen und Volumenänderungen bei Reaktionsharzen
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015; X, 134 S.: graph. Darst.

Ievdokymov, Mykola;  Altenbach, Holm [Gutachter];  Krüger, Manja [Gutachter] 

Identification technique of mechanism-based constitutive model for cast iron under thermo-mechanical loads
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015; IX, 132 S.: graph. Darst.

John, Marianne;  Altenbach, Holm [Gutachter] 

Untersuchungen zu Eigenspannungen in CFK-Schaum-Sandwichstrukturen
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015; XXIII, 123 S.: Ill., graph. Darst.; 21 cm

Mönnich, Sebastian;  Altenbach, Holm [GutachterIn] 

Entwicklung einer Methodik zur Parameteridentifikation für Orientierungsmodelle in Spritzgießsimulationen
In: Magdeburg, 2015; XIII, 169 Blätter: Illustrationen ; [Literaturverzeichnis: Seite 158-169]

Unterhofer, Katrin;  Altenbach, Holm [Gutachter] 

Charakterisierung von makro- und mikroskaligen thermo-mechanischen Materialeigenschaften dünner Polymerfilme
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015; Hamburg: tredition GmbH; III, 149 S.: Ill., graph. Darst.; 24 cm, ISBN 978-3-7323-5649-2

Herausgeberschaft
Altenbach, Holm;  Sadowski, Tomasz 

Failure and Damage Analysis of Advanced Materials
In: Wien [u.a.]: Springer, 2015; Online-Ressource - (CISM International Centre for Mechanical Sciences; 560)

Altenbach, Holm;  Matsuda, Tetsuya;  Okumura, Dai 

From creep damage mechanics to homogenization methods - a liber amicorum to celebrate the birthday of Nobutada Ohno
In: 2015; Online-Ressource - (Advanced structured materials; 64)

Altenbach, Holm;  Brüning, Michael 

Inelastic behavior of materials and structures under monotonic and cyclic loading
In: Heidelberg [u.a.]: Springer, 2015; Online-Ressource - (Advanced structured materials; 57)

Altenbach, Holm;  Mikhasev, Gennadi I. 

Shell and Membrane theories in mechanics and biology - from macro- to nanoscale structures
In: Heidelberg [u.a.]: Springer, 2015; Online-Ressource - (Advanced structured materials; 45)

Öchsner, Andreas;  Altenbach, Holm 

Applications of computational tools in biosciences and medical engineering
In: Cham [u.a.]: Springer International Publ., 2015; Online Ressource (PDF-Datei) - (Advanced Structured Materials; 71)

Öchsner, Andreas;  Altenbach, Holm 

Mechanical and materials engineering of modern structure and component design
In: Cham [u.a.]: Springer International Publ., 2015; Online Ressource (PDF-Datei) - (Advanced Structured Materials; 70)

Öchsner, Andreas [ed.];  Altenbach, Holm [ed.] 

Mechanical and materials engineering of modern structure and component design
In: Cham [u.a.]: Springer, 2015; XI, 451 S.: Ill., graph. Darst.; 24 cm - (Advanced structured materials; 70), ISBN 3319194429 ; Kongress: International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2014; 8 (Paris) : 2014.06.30-07.03 ; [This volume contains 35 revised and extended research articles written by experienced researchers participating in the conference]

2014

Begutachteter Zeitschriftenartikel
Altenbach, Holm;  Beschetnikov, Dmitriy A.;  Lvov, Gennadiy I.;  Naumenko, Konstantin;  Sukiasov, Vladimir G. 

Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff
In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67

Altenbach, Holm;  Eremeyev, Victor 

Strain rate tensors and constitutive equations of inelastic micropolar materials
In: International journal of plasticity. - New York, NY : Pergamon Press, Bd. 63.2014, S. 3-17

Bobyr, Mykola;  Altenbach, Holm;  Khalimon, Oleksandr 

On the application of the continuum damage mechanics to multi-axial low-cyclic damage
In: Archive of applied mechanics : (Ingenieur-Archiv). - Berlin : Springer, 2014

Lvov, Ivan;  Naumenko, Konstantin;  Altenbach, Holm 

Homogenisation approach in analysis of creep behaviour in multipass weld
In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53

Längler, Frank;  Naumenko, Konstantin;  Altenbach, Holm;  Ievdokymov, Mykola 

A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428

Mikhasev, G. I.;  Altenbach, Holm;  Korchevskaya, E. A. 

On the influence of the magnetic field on the eigenmodes of thin laminated cylindrical shells containing magnetorheological elastomer
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 113.2014, S. 186-196

Vilchevskaya, Elena;  Ivanova, Elena;  Altenbach, Holm 

Description of fluid-gas phase transition in the frame of continuum mechanics
In: Continuum mechanics and thermodynamics : analysis of complex materials and judicious evaluation of the environment. - Berlin : Springer, Bd. 26.2014, 2, S. 221-245

Buchbeitrag
Altenbach, Holm;  Eremeyev, Victor 

Basic equations of continuum mechanics
In: Plasticity of pressure-sensitive materials. - Berlin [u.a] : Springer, S. 1-47, 2014

Altenbach, Holm;  Kutschke, Andreas;  Naumenko, Konstantin 

Constitutive models for creep-damage behavior at quasi-static and cyclic loading
In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity \'14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69 ; Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08

Altenbach, Holm;  Bolchoun, Alexandre;  Kolupaev, Vladimir 

Phenomenological yield and failure criteria
In: Plasticity of pressure-sensitive materials. - Berlin [u.a] : Springer, S. 49-152, 2014

Dissertation
Dietrich, Sascha;  Altenbach, Holm [Gutachter] 

Numerische Untersuchungen zur mechanischen Zuverlässigkeit verkapselter Siliziumsolarzellen
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014; Halle (Saale): Fraunhofer-Institut für Werkstoffmechanik IWM; III, 155 S.: Ill., graph. Darst.; 21 cm

Kaindl, Stefan;  Altenbach, Holm [Gutachter];  Waltz, Manuela [Gutachter];  Fotiu, Peter [Gutachter] 

Simulation der Schwingfestigkeit von Elastomerbauteilen
In: Halle Univ., Zentrum für Ingenieurwissenschaften, Diss., 2014, Online-Ressource (158 Bl. = 28,20 mb); http://nbn-resolving.de/urn:nbn:de:gbv:3:4-12810 ; [Sprache der Zusammenfassung: Englisch; Tag der Verteidigung: 10.04.2014]

Ozhoga-Maslovskaja, Oksana;  Altenbach, Holm [Gutachter] 

Micro scale modeling grain boundary damage under creep conditions
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014; VII, 113 S.: Ill., graph. Darst.; 30 cm

Herausgeberschaft
Altenbach, Holm [Hrsg.];  Öchsner, Andreas [Hrsg.] 

Plasticity of pressure-sensitive materials
In: Berlin [u.a]: Springer, 2014; X, 376 S.: graph. Darst.; 25 cm - (Engineering materials), ISBN 364240944X

Öchsner, Andreas;  Altenbach, Holm 

Design and computation of modern engineering materials
In: Cham [u.a.]: Springer, 2014; VIII, 438 S.: Ill., graph. Darst. - (Advanced structured materials; 54), ISBN 978-3-319-07382-8

Lehrbuch
Altenbach, Holm;  Dreyer, Hans-Joachim;  Holzmann, Günther [Begr.];  Meyer, Heinz [Begr.];  Schumpich, Georg [Begr.] 

Holzmann/Meyer/Schumpich Technische Mechanik Festigkeitslehre
In: Wiesbaden: Springer Vieweg, 2014, 11., überarb. und erw. Aufl.; Online-Ressource (XVIII, 412 S.): Ill., ISBN 978-3-658-06041-1

2013

Abstrakt
Kutschke, Andreas;  Naumenko, Konstantin;  Altenbach, Holm 

A material model for describing the anomalous ratcheting effect of advanced chromium steels
In: CanCNSM 2013. - Montréal, insges. 2 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Naumenko, Konstantin;  Weps, Matthias;  Eremeyev, Victor;  Altenbach, Holm 

Analysis of laminates for photovoltaic appliacations
In: 8th German-Greek-Polish Symposium on recent advances in mechanics. - Univ. of Bremen, S. 59-60, 2013 ; Kongress: German-Greek-Polish Symposium on recent advances mechanics; 8 (Goslar) : 2013.09.09-13

Artikel in Kongressband
Längler, Frank;  Naumenko, Konstantin;  Altenbach, Holm;  Ievdokymov, Mykola 

A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers
In: CanCNSM 2013. - Montréal, insges. 6 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Begutachteter Zeitschriftenartikel
Altenbach, Holm;  Eremeyev, Victor 

Equilibrium of a second-gradient fluid and an elastic solid with surface stresses
In: Meccanica. - Dordrecht [u.a.] : Springer Science + Business Media B.V, insges. 9 S., 2013

Altenbach, Holm;  Eremeyev, Victor 

Large deformations of inelastic shells
In: Key engineering materials. - Aedermannsdorf : Trans Tech Publ, Bd. 535/536.2013, S. 76-79

Altenbach, Holm;  Kozhar, Sergii;  Naumenko, Konstantin 

Modeling creep damage of an aluminumsilicon eutectic alloy
In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, Bd. 22.2013, 5, S. 683-698

Altenbach, Holm;  Eremeyev, Victor 

On the constitutive equations of viscoelastic micropolar plates and shells
In: Proceedings of the Indian National Science Academy. - New Delhi, Bd. 79.2013, 4, S. 513-518

Altenbach, Holm;  Eremeyev, Victor;  Nasedkin, Andrey 

Transient problems for piezoelectric bodies with surface films
In: Teoretičeskaja i prikladnaja mechanika. - Kiev : Vyšča Škola, Bd. 52.2013, 6, S. 115-124

Altenbach, Holm;  Eremeyev, Victor 

Vibration analysis of non-linear 6-parameter prestressed shells
In: Meccanica. - Dordrecht [u.a.] : Springer Science + Business Media B.V, insges. 11 S., 2013

Birsan, Mircea;  Altenbach, Holm 

On the Cosserat model for thin rods made of thermoelastic materials with voids
In: Discrete and continuous dynamical systems. - Springfield, Mo : American Institute of Mathematical SciencesDiscrete and continuous dynamical systems / S, Bd. 6.2013, 6, S. 1473-1485

Eisenträger, Joahanna;  Naumenko, Konstantin;  Altenbach, Holm;  Lenz, Wolfgang 

Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80

Kolupaev, Vladimir;  Yu, M.-H.;  Altenbach, Holm 

Visualization of the unified strength theory
In: Archive of applied mechanics. - Berlin : Springer, Bd. 83.2013, 7, S. 1061-1085

Kolupaev, Vladimir;  Yu, Mao-H.;  Altenbach, Holm 

Yield criteria of hexagonal symmetry in the π-plane
In: Acta mechanica. - Wien : Springer, Bd. 224.2013, 7, S. 1527-1540

Lvov, Ivan;  Naumenko, Konstantin;  Altenbach, Holm 

Micro-macro analysis of creep and damage behavior of multi-pass welds
In: Problemy mašinostroenija. - Kiev : Izd. \"Naukova Dumka\", Bd. 16.2013, 1, S. 31-38

Weps, Matthias;  Naumenko, Konstantin;  Altenbach, Holm 

Unsymmetric three-layer laminate with soft core for photovoltaic modules
In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339

Buchbeitrag
Altenbach, Holm;  Eremeyev, Victor 

Actual developments in the nonlinear shell theory - state of the art and new applications of the six-parameter shell theory
In: Shell structures: theory and applications ; Vol. 3. - Boca Raton [u.a.] : CRC Press, S. 3-12, 2013 ; Kongress: Conference Shell Structures: Theory and Applications; 10 (Gdańsk; Jurata) : 2013.10.16-18

Altenbach, Holm;  Eremeyev, Victor 

Cosserat media
In: Generalized continua from the theory to engineering applications. - Wien [u.a.] : Springer, S. 65-130, 2013 - (CISM International Centre for Mechanical Sciences; 541)

Altenbach, Holm;  Bîrsan, Mircea;  Eremeyev, Victor 

Cosserat-type rods
In: Generalized continua from the theory to engineering applications. - Wien [u.a.] : Springer, S. 179-248, 2013 - (CISM International Centre for Mechanical Sciences; 541)

Altenbach, Holm;  Eremeyev, Victor 

Cosserat-type shells
In: Generalized continua from the theory to engineering applications. - Wien [u.a.] : Springer, S. 131-178, 2013 - (CISM International Centre for Mechanical Sciences; 541)

Altenbach, Holm;  Yevgen, Gorash 

High-temperature inelastic behavior of the austenitic steel AISI type 316
In: Advanced materials modelling for structures. - Berlin [u.a.] : Springer, S. 17-30, 2013 - (Advanced Structured Materials; 19)

Altenbach, Holm;  Eremeyev, Victor A.;  Lebedev, Leonid P. 

Mathematical study of boundary-value problems of linear elasticity with surface stresses
In: Altenbach, Holm: : Surface Effects in Solid Mechanics. - Berlin [u.a.] : Springer, S. 1-19, 2013 - (Advanced Structured Materials; 30)

Altenbach, Holm;  Eremeyerev, Victor A.;  Morozov, Nikita F. 

Mechanical properties of materials considering surface effects
In: IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures. - Dordrecht [u.a.] : Springer, S. 105-115, 2013 - (IUTAM bookseries; 31)

Altenbach, Holm;  Eremeyev, Victor A. 

On the continuum mechanics approach in modeling nanosized structural elements
In: New frontiers of nanoparticles and nanocomposite materials. - Berlin : Springer, S. 351-371, 2013 - (Advanced Structured Materials; 4)

Altenbach, Holm;  Eremeyev, Victor A.;  Morozov, Nikita F. 

On the influence of residual surface stresses on the properties of structures at the nanoscale
In: Altenbach, Holm: : Surface Effects in Solid Mechanics. - Berlin [u.a.] : Springer, S. 21-32, 2013 - (Advanced Structured Materials; 30)

Altenbach, Holm;  Eremeyev, Victor 

Rayleigh variational principle and vibrations of prestressed shells
In: Shell structures: theory and applications ; Vol. 3. - Boca Raton [u.a.] : CRC Press, S. 285-288, 2013 ; Kongress: Conference Shell Structures: Theory and Applications; 10 (Gdańsk; Jurata) : 2013.10.16-18

Altenbach, Holm;  Eremeyev, Victor A. 

Shells and plates with surface effects
In: Generalized continua as models for materials. - Berlin [u.a.] : Springer, S. 1-15, 2013 - (Advanced Structured Materials; 22)

Altenbach, Holm;  Eremeyev, Victor A. 

Surface viscoelasticity and effective properties of materials and structures
In: Advanced materials modelling for structures. - Berlin [u.a.] : Springer, S. 9-16, 2013 - (Advanced Structured Materials; 19)

Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm;  Lenz, Wolfgang 

Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 10 S., 2013 ; Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26

Eremeyev, Victor;  Ivanova, Elena;  Altenbach, Holm;  Morozov, Nikita 

On effictive stiffness of a three-layered plate with a core filled with a capillary fluid
In: Shell structures: theory and applications ; Vol. 3. - Boca Raton [u.a.] : CRC Press, S. 85-88, 2013

Kolupaev, Vladimir A.;  Bolchoun, Alexandre;  Altenbach, Holm 

Yield criteria for incompressible materials in the shear stress space
In: Experimental and numerical investigation of advanced materials and structures. - Berlin [u.a.] : Springer, S. 107-119, 2013 - (Advanced structured materials; 41)

Zhilin, Pavel A.;  Altenbach, Holm;  Ivanova, Elena A.;  Krivtsov, Anton 

Material strain tensor
In: Generalized continua as models for materials. - Berlin [u.a.] : Springer, S. 321-331, 2013 - (Advanced Structured Materials; 22)

Dissertation
Girchenko, Anna;  Altenbach, Holm [Gutachter] 

Modeling of micro- and nanostructures made of films and crystals/fibers arrays
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013; VIII, 109 S.: graph. Darst.; 30 cm

Sander, Martin;  Altenbach, Holm [Gutachter] 

Systematische Untersuchung von Rissen in verkapselten Solarzellen bei thermischer und mechanischer Belastung
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013; Halle (Saale): Fraunhofer CSP; 129 S.: Ill., graph. Darst.; 21 cm - (CSP-Bericht / Fraunhofer-Center für Silizium-Photovoltaik CSP; 963/2013)

Tibba, Getachew Shunki;  Altenbach, Holm [Gutachter];  Specht, Eckehard [Gutachter] 

Modeling the inelastic behavior of heat exchangers accounting for fluid-structure interactions
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013; XI, 94 S.: graph. Darst.

Herausgeberschaft
Altenbach, Holm;  Eremeyev, Victor 

Generalized continua from the theory to engineering applications
In: Wien [u.a.]: Springer, 2013; 402 S.: Ill., graph. Darst. - (CISM International Centre for Mechanical Sciences; 541), ISBN 978-3-7091-1370-7 ; Kongress: Course Generalized Continua - from the Theory to Engineering Applications; (Udine) : 2011.09.19-23

Altenbach, Holm [Hrsg.];  Kruch, Serge [Hrsg.] 

Advanced materials modelling for structures
In: Berlin [u.a.]: Springer, 2013; xxii, 361 p.: ill.; 24 cm - (Advanced structured materials; 19), ISBN 3642351662 ; Kongress: IUTAM Symposium \"Advanced Materials Modelling for Struktures\"; (Paris) : 2012.04.23-27

Altenbach, Holm [Hrsg.];  Forest, Samuel [Hrsg.];  Krivtsov, Anton [Hrsg.] 

Generalized continua as models for materials - with multi-scale effects or under multi-field actions
In: Berlin [u.a.]: Springer, 2013; XII, 331 S.: Ill., graph. Darst. - (Advanced structured materials; 22), ISBN 978-3-642-36393-1 ; Kongress: Trilateral Seminar Generalized Continua as Models for Materials with Multi-Scale Effects or Under Multifield Actions; 2 (Wittenberg) : 2012.09.26-30 ; [Literaturangaben]

Öchsner, Andreas;  Altenbach, Holm 

Advanced computational engineering and experimenting II - selected, peer reviewed papers from the Sixth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2012), July 1-4, 2012, Istanbul, Turkey
In: Zürich-Durnten: Trans Tech, 2013; 150 S., ISBN 978-3-03-785682-6 ; Kongress: International Conference on Advanced Computational Engineering and Experimenting ; 6 (Istanbul, Turkey) : 2012.07.01-04 ; ACE-X 2012; 6 (Istanbul, Turkey) : 2012.07.01-04

Öchsner, Andreas;  Altenbach, Holm 

Advances in bio-mechanical systems and materials
In: Berlin [u.a.]: Springer, 2013; 200 S. - (Advanced structured materials; 40), ISBN 978-331-90047-8-5

Öchsner, Andreas;  Silva, Lucas F. M.;  Altenbach, Holm 

Characterization and Development of Biosystems and Biomaterials
In: Berlin: Springer, 2013; Online-Ressource (IX, 253 p. 152 illus): digital - (Advanced Structured Materials; 29), ISBN 978-3-642-31470-4 ; [Description based upon print version of record]

Öchsner, Andreas;  Altenbach, Holm 

Experimental and numerical investigation of advanced materials and structures
In: Berlin [u.a.]: Springer, 2013, [Online-Ausg.] - (Advanced structured materials; 41)

Öchsner, Andreas [Hrsg.];  Silva, Lucas F. M. da;  Altenbach, Holm 

Design and analysis of materials and engineering structures - [5th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2011, was held in Algarve, Portugal, from 3 to 6 July, 2011 ; revised and extended research articles]
In: Berlin [u.a.]: Springer, 2013; VIII, 178 S.: Ill., graph. Darst.; 24 cm - (Advanced structured materials; 32), ISBN 978-3-642-32294-5 ; Kongress: International Conference on Advanced Computational Engineering and Experimenting; 5 (Algarve) : 2011.07.03-06 ; ACE-X; 5 (Algarve) : 2011.07.03-06 ; [Literaturangaben]

Wissenschaftliche Monographie
Altenbach, Holm;  Morozov, Nikita F. 

Surface Effects in Solid Mechanics - Models, Simulations and Applications
In: Berlin [u.a.]: Springer, 2013; Online-Ressource (XI, 194 p. 96 illus., 20 illus. in color): digital - (Advanced Structured Materials; 30), ISBN 978-3-642-35783-1 ; [Description based upon print version of record]

Eremeyev, Victor;  Lebedev, Leonid P.;  Altenbach, Holm 

Foundations of micropolar mechanics
In: Heidelberg [u.a.]: Springer, 2013; X, 142 S.: graph. Darst.; 235 mm x 155 mm - (Springer briefs in applied sciences and technology), ISBN 978-3-642-28352-9 ; [Literaturangaben]

2012

Begutachteter Zeitschriftenartikel
Altenbach, Holm;  Eremeyev, Victor;  Ivanova, Elena A.;  Morozov, Nikita F. 

Izgib trechslojnoj plastinki s blizkoj k nulju žestkostʹju na poperečnyn sdvig
In: Fizičeskaja mezomechanika - Tomsk: Inst. Fiziki Pročnosti i Materialovedenija SO RAN, Bd. 15.2012, 6, S. 15-19

Girchenko, Anna A.;  Eremeyev, Victor A.;  Altenbach, Holm 

Interaction of a helical shell with a nonlinear viscous fluid
In: International journal of engineering science. - New York, NY [u.a.] : Science Direct, Bd. 61.2012, S. 53-58

Buchbeitrag
Altenbach, Holm;  Kozhar, Sergii;  Naumenko, Konstantin 

Modeling creep ratcheting of an aluminum-silicon eutectic alloy
In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S. ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31

Altenbach, Holm;  Eremeyev, Victor A. 

Strain rate tensors in micropolar mechanics
In: Analytical, Computational, and experimental inelasticity in deformable solids. - NEAT Press, S. 76-78, 2013 ; Kongress: International Symposium on Plasticity & Its Current Applications; 19 (Nassau, Bahamas) : 2013.01.03-08

Altenbach, Holm 

Teorija polzučesti - ot klassičeskich do nekotorych sovremennych modelej
In: Aktualʹnye problemy mechaniki splošnoj sredy: trudy meždunarodnoj konferencii, posvja ščennoj 100-letiju akademika NAN Armenii N. Ch. Arutjunjana 08-12 oktjabrja 2012, Cachkadzor, Armenija - Erevan: Tigran Mec, S. 71-75

Dissertation
Engelmann, Julia;  Altenbach, Holm [Gutachter];  Wahle, Michael [Gutachter];  Ressing, Henning [Gutachter] 

Strukturmechanische Auslegung von zellularen metallischen punktgeschweißten Sandwichstrukturen
In: Halle Univ., Zentrum für Ingenieurwissenschaften, Diss., 2012, Online-Ressource (141 Bl. = 37,85 mb); http://nbn-resolving.de/urn:nbn:de:gbv:3:4-8752 ; [Sprache der Zusammenfassung: Englisch; Tag der Verteidigung: 18.09.2012]

Kohlhuber, Markus Michael;  Altenbach, Holm [Gutachter];  Brandmeier, Thomas [Gutachter];  Krä, Christian [Gutachter] 

Ausbreitung elastischer Wellen in komplexen dünnwandigen Strukturen
In: Halle Univ., Zentrum für Ingenieurwissenschaften, Diss., 2012, Online-Ressource (182 S. = 6,51 mb); http://nbn-resolving.de/urn:nbn:de:gbv:3:4-8175 ; [Sprache der Zusammenfassung: Englisch; Tag der Verteidigung: 20.06.2012]

Herausgeberschaft
Öchnser, Andreas [Hrsg.];  Silva, Lucas Filipe Martins da [Hrsg.];  Altenbach, Holm [Hrsg.] 

Characterization and Development of Biosystems and Biomaterials
In: Berlin: Springer Berlin, 2012; 250 S.; 235 mm x 155 mm - (Advanced Structured Materials; 29), ISBN 3642314694

Öchsner, Andreas;  Silva, Lucas Filipe Martins;  Altenbach, Holm 

Analysis and design of biological materials and structures
In: Heidelberg [u.a.] Springer, 2012, IX, 221 S., Ill., graph. Darst., 24 cm - (Advanced structured materials; 14), ISBN 978-3-642-22130-9 ; [Literaturangaben]

Öchsner, Andreas;  Silva, Lucas F.M. da;  Altenbach, Holm 

Materials with complex behaviour II - properties, non-classical materials and new technologies ; [the 4th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2010, was held in Paris, France, from 05 to 07 July 2010]
In: Berlin [u.a.]: Springer, 2012; XI, 727 S.: Ill., graph. Darst.; 235 mm x 155 mm - (Advanced Structured Materials; 16), ISBN 364222699X ; Kongress: International Conference on Advanced Computational Engineering and Experimenting; 4 (Paris, France) : 2010.07.05-07 ; ACE-X; 4 (Paris, France) : 2010.07.05-07

Öchsner, Andreas;  Silva, Lucas F. M.;  Altenbach, Holm 

Mechanics and properties of composed materials and structures
In: Berlin [u.a.]: Springer, 2012; Online-Ressource: digital - (Advanced Structured Materials; 31), ISBN 978-3-642-31497-1 ; [Includes bibliographical references]

Lehrbuch
Altenbach, Holm 

Kontinuumsmechanik - Einführung in die materialunabhängigen und materialabhängigen Gleichungen
In: Berlin [u.a.]: Springer Vieweg, 2012, 2. Aufl.; XIV, 342 S.: graph. Darst.; 24 cm, ISBN 978-3-642-24118-5 ; [Literaturangaben]

Holzmann, Günther;  Meyer, Heinz;  Schumpich, Georg 

Technische Mechanik [3]: Festigkeitslehre - mit 108 Aufgaben und 135 Beispielen mit Lösungen
In: Wiesbaden: Springer Vieweg, 2012, 10., überarb. Aufl.; XVI, 387 S.: graph. Darst. - (Studium)

Originalartikel in begutachteter internationaler Zeitschrift
Altenbach, Holm;  Bîrsan, Mircea;  Eremeyev, Victor A. 

On a thermodynamic theory of rods with two temperature fields
In: Acta mechanica. - Wien : Springer, Bd. 223.2012, 8, S. 1583-1596

Altenbach, Holm;  Eremeyev, Victor A.;  Morozov, Nikita F. 

Surface viscoelasticity and effective properties of thin-walled structures at the nanoscale
In: International journal of engineering science. - Oxford [u.a.] : Elsevier Science, Bd. 59.2012, S. 83-89

B ̂  irsan, Mircea;  Altenbach, Holm 

The Korn-type inequality in a Cosserat model for thin thermoelastic porous rods
In: Meccanica. - Dordrecht [u.a.] : Kluwer, Bd. 47.2012, 3, S. 789-794

Brîsan, Mircea;  Altenbach, Holm;  Sadowski, Tomasz;  Eremeyev, Victor;  Pietras, Daniel 

Deformation analysis of functionally graded beams by the direct approach
In: Composites. - Oxford [u.a.] : ElsevierComposites / B, Bd. 43.2012, 3, S. 1315-1328

Gorash, Yevgen;  Altenbach, Holm;  Lvov, Gennadiy 

Modelling of high-temperature inelastic behaviour of the austenitic steel AISI type 316 using a continuum damage mechanics approach
In: The journal of strain analysis for engineering design. - London : Sage, Bd. 47.2012, 4, S. 229-243

Schulze, Stefan-H.;  Pander, Matthias;  Naumenko, Konstantin;  Altenbach, Holm 

Analysis of laminated glass beams for photovoltaic applications
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036; http://dx.doi.org/10.1016/j.ijsolstr.2012.03.028

Originalartikel in begutachteter zeitschriftenartiger Reihe
Altenbach, Holm;  Dresbach, Christian;  Petzold, Matthias 

Characterizing the anisotropic hardening behavior of aluminum bonding wires
In: Materials with complex behaviour II. - Berlin [u.a.] : Springer, S. 583-598, 2012

Altenbach, Holm;  Gorash, Yevgen 

Modeling of high-temperature inelastic behavior of the steel AISI type 316 using CDM approach
In: Non-linear response of conventional & advanced materials, and multi-scale modeling. - Fulton, Md. : NEAT Press, S. 256-258, 2012

Kolupaev, Vladimir;  Altenbach, Holm 

Consistent view of generalised yield surfaces
In: Non-linear response of conventional & advanced materials, and multi-scale modeling. - Fulton, Md. : NEAT Press, S. 76-78, 2012

2011

Artikel in Zeitschrift
Bîrsana, Mircea;  Altenbach, Holm 

On the theory of porous elastic rods
In: International journal of solids and structures. - New York, NY [u.a.] : Elsevier, Bd. 48.2011, 6, S. 910-924

Buchbeitrag
Altenbach, Holm;  Eremeyev, Victor A.;  Lebedev, Leonid 

Micropolar shells as two-dimensional generalized continua models
In: Mechanics of generalized continua. - Berlin [u.a.] : Springer, S. 23-55, 2011 - (Advanced Structured Materials; 7)

Altenbach, Holm;  Eremeyev, Victor 

On the inelastic constitutive equations of plates and shells made of foams
In: Engineering plasticity and its applications. - Singapore [u.a.] : World Scientific, S. 86-90, 2011 ; Kongress: AEPA; 10 (Wuhan, China) : 2010.11.15-17

Dissertation
Eitner, Ulrich;  Altenbach, Holm [Gutachter];  Brendel, Rolf [Gutachter] 

Thermomechanics of photovoltaic modules
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2011; Online-Ressource (89 S. = 6,56 mb)

Kozhar, Sergii;  Regener, Doris [Gutachter];  Altenbach, Holm [Gutachter] 

Festigkeitsverhalten der Al-Si-Gusslegierung AlSi12CuNiMg bei erhöhten Temperaturen
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2011; VI, 114 S.: graph. Darst.

Kröner, Carsten;  Altenbach, Holm [Gutachter];  Schäuble, Ralf [Gutachter] 

Beschreibung des Kriechverhaltens kurzfaserverstärkter Komposite aus den Eigenschaften der Konstituenten
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2011; Online-Ressource (I, 98 Bl. = 4,33 mb)

Müller, Peter;  Tomas, Jürgen [Gutachter];  Altenbach, Holm [Gutachter] 

Druck-, Stoß- und Bruchverhalten feuchter kugelförmiger Granulate
In: Zugl.: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2011; Magdeburg: Docupoint-Verl.; XIV, 235 S.: Ill., graph. Darst.; 21 cm - (Micro-macro transactions; 5), ISBN 978-3-86912-104-8

Herausgeberschaft
Altenbach, Holm;  Maugin, Gérard A.;  Erofeev, Vladimir I. 

Mechanics of generalized continua - [first trilateral French-German-Russian seminar held in Lutherstadt Wittenberg (Germany) August 9 - 11, 2010 ; selection from the lectures]
In: Berlin [u.a.]: Springer, 2011; XIX, 350 S.: Ill., graph. Darst. - (Advanced structured materials; 7), ISBN 978-3-642-19218-0 ; Kongress: French-German-Russian Seminar: \"Mechanics of Generalized Continua\"; 1 (Wittenberg) : 2010.08.09-11 ; [Literaturangaben]

Altenbach, Holm;  Eremeyev, Victor 

Shell-like structures - non-classical theories and applications ; [contributions presented at the EUROMECH 527 Colloquium "Shell-Like Structures: Non-Classical Theories and Applications" held in Wittenberg, Germany]
In: Berlin [u.a.]: Springer, 2011; XI, 750 S.: Ill., graph. Darst.; 24 cm - (Advanced structured materials; 15), ISBN 978-3-642-21854-5 ; Kongress: EUROMECH Colloquium; 527 (Wittenberg) : 2011.08.22-26 ; Colloquium \"Shell-Like Structures: Non-Classical Theories and Applications\"; (Wittenberg) : 2011.08.22-26

Öchsner, Andreas;  Silva, Lucas F. M. da;  Altenbach, Holm 

Advanced computational engineering and experimenting - selected, peer reviewed papers from the Fourth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2010), July 8th - 9th, 2010, held at the Hotel Concorde La Fayette Paris, France
In: Durnten-Zurich [u.a.]: TTP, Trans Tech Publ., 2011; VIII, 116 S.: Ill., graph. Darst. - (Key engineering materials; 478)

Monografiebeitrag
Altenbach, Holm;  Eremeyev, Victor A. 

Mechanics of viscoelastic plates made of FGMs
In: Computational modelling and advanced simulations. - Dordrecht [u.a.] : Springer, S. 33-48, 2011

Nicht begutachteter Zeitschriftenartikel
Morozov, Nikita Fedorovič  ;  Altenbach, Holm;  Eremeev, Viktor Anatolʹ  evič   

Zadači nanomechaniki nanoporistych obʺektov
In: Vestnik INŽĖKONA. - Sankt-Peterburg : Univ.Vestnik INŽĖKONA / Serija Techničeskie nauki, 8, S. 3-5, 2011

Originalartikel in begutachteter internationaler Zeitschrift
Altenbach, Holm;  Eremeyev, Victor A.;  Kutschke, Andreas;  Naumenko, Konstantin 

Conservation laws and prediction methods for stress concentration fields
In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355

Altenbach, Holm 

Mechanics of advanced materials for lightweight structures
In: Proceedings of the Institution of Mechanical Engineers. - Los Angeles, Calif. [u.a.] : SageProceedings of the Institution of Mechanical Engineers / C, Bd. 225.2011, 11, S. 2481-2496

Altenbach, Holm;  Eremeyev, Victor A. 

On the shell theory on the nanoscale with surface stresses
In: International journal of engineering science. - Oxford [u.a.] : Elsevier Science, Bd. 49.2011, 12, S. 1294-1301

Altenbach, Holm;  Eremeyev, Victor A.;  Lebedev, Leonid P. 

On the spectrum and stiffness of an elastic body with surface stresses
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 91.2011, 9, S. 699-710

Bolchoun, Alexandre;  Kolupaev, Vladimir A.;  Altenbach, Holm 

Konvexe und nichtkonvexe Fließflächen
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 75.2011, 2, S. 73-92

Bîrsan, Mircea;  Altenbach, Holm 

On the dynamical theory of thermoelastic simple shells
In: Zeitschrift für angewandte Mathematik und Mechanik : ZAMM. - Weinheim : Wiley-VCH, Bd. 91.2011, 6, S. 443-457

Bîrsan, Mircea;  Altenbach, Holm 

The Korn-type inequality in a Cosserat model for thin thermoelastic porous rods
In: Meccanica. - Dordrecht [u.a.] : Springer Science + Business Media B.V, insges. 6 S., 2011

Bîrsan, Mircea;  Altenbach, Holm 

Theory of thin thermoelastic rods made of porous materials
In: Archive of applied mechanics. - Berlin : Springer, Bd. 81.2011, 10, S. 1365-1391

Naumenko, Konstantin;  Altenbach, Holm;  Kutschke, Andreas 

A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature
In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597

Naumenko, Konstantin;  Altenbach, Holm;  Kutschke, Andreas 

Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature
In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208

Originalartikel in begutachteter nationaler Zeitschrift
Altenbach, Holm 

Strength hypotheses - a never ending story
In: Czasopismo techniczne. - Kraków : [s.n.], Bd. 107.2011, 20, S. 5-15

Originalartikel in begutachteter zeitschriftenartiger Reihe
Bîrsan, Mircea;  Altenbach, Holm 

Analysis of the deformation of multi-layered orthotropic cylindrical elastic shells using the direct approach
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 29-52, 2011 - (Advanced structured materials; 15)

Dresbach, Christian;  Lorenz, Georg;  Petzold, Matthias;  Altenbach, Holm 

Analysis of chip damage risk in thermosonic wire bonding
In: Advanced computational engineering and experimenting. - Durnten-Zurich [u.a.] : TTP, Trans Tech Publ., S. 75-80, 2011 - (Key engineering materials; 478)

Eitner, Ulrich;  Kajari-Schröder, Sarah;  Köntges, Marc;  Altenbach, Holm 

Thermal stress and strain of solar cells in photovoltaic modules
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 453-468, 2011 - (Advanced structured materials; 15)

Kolupaev, Vladimir A.;  Bolchoun, Alexandre;  Altenbach, Holm 

Strength hypothesis applied to hard foams
In: Advances in experimental mechanics VIII. - Durnten-Zuerich [u.a.] : ttp, Trans Tech Publ., S. 99-104, 2011 - (Applied mechanics and materials; 70)

Meenen, Johannes;  Altenbach, Holm;  Eremeyev, Victor;  Naumenko, Konstantin 

A variationally consistent derivation of microcontinuum theories
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)

Schulze, Stefan-H.;  Pander, Matthias;  Naumenko, Konstantin;  Girchenko, Anna;  Altenbach, Holm 

Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)

2010

Artikel in Zeitschrift
Altenbach, Holm;  Eremeyev, Victor A.;  Lebedev, Leonid P.;  Rendón, Leonardo A. 

Acceleration waves and ellipticity in thermoelastic micropolar media
In: Archive of applied mechanics. - Berlin : Springer, Bd. 80.2010, 3, S. 217-227

Altenbach, Holm;  Eremeyev, Victor A. 

On the effective stiffness of plates made of hyperelastic materials with initial stresses
In: International journal of non-linear mechanics. - Amsterdam : Elsevier Science, Bd. 45.2010, 10, S. 976-981

Altenbach, Holm;  Eremeyev, Victor A.;  Lebedev, Leonid P. 

On the existence of solution in the linear elasticity with surface stresses
In: ZAMM. - Berlin : Wiley-VCH, Bd. 90.2010, 3, S. 231-240

Altenbach, Johannes;  Altenbach, Holm;  Eremeyev, Victor A. 

On generalized cosserat-type theories of plates and shells - a short review and bibliography
In: Archive of applied mechanics. - Berlin : Springer, Bd. 80.2010, S. 73-92

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin;  Kozhar, Sergii 

Modelling of low cycle fatigue for an aluminum alloy at elevated temperature
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 22-24, 2010

Altenbach, Holm;  Eremeyev, V. A. 

On the shell and plate theories with surface stresses
In: Shell structures: theory and applications. - Boca Raton [u.a.] : CRC Press,Taylor & Francis Group, S. 47-50, 2010

Altenbach, Holm;  Kutschke, Andreas;  Naumenko, Konstantin 

Stress range dependent creep and damage - experimentel observations and their phenomenological description
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 55-57, 2010

Bîrsan, M.;  Altenbach, Holm 

Continuous dependence and instability in the linear theory of elastic shells
In: Shell structures: theory and applications. - Boca Raton [u.a.] : CRC Press,Taylor & Francis Group, S. 55-58, 2010

2009

Artikel in Zeitschrift
Altenbach, Holm;  Eremeyev, V. A. 

Eigen-vibrations of plates made of functionally grades material
In: Computers, materials & continua. - Encino, Calif. : Tech Science Press, Bd. 9.2009, 2, S. 153-177

Altenbach, Holm;  Eremeyev, Victor A.;  Morozov, Nikita F. 

Linear theory of shells taking into account surface stresses
In: Doklady physics. - New York, N.Y : Pleiades Publ, Bd. 54.2009, 12, S. 531-535

Altenbach, Holm;  Eremeyev, Victor A. 

On the bending of viscoelastic plates made of polymer foams
In: Acta mechanica. - Wien : Springer, Bd. 204.2009, S. 137-154

Altenbach, Holm;  Eremeyev, Victor A.;  Indeitsev, Dmitry A.;  Ivanova, Elena A.;  Krivtsov, Anton M. 

On the contributions of Pavel Andreevich Zhilin to mechanics
In: Technische Mechanik. - Magdeburg : Magdeburger Verein für Techn. Mechanik, Bd. 29.2009, 2, S. 115-134

Altenbach, Holm;  Eremeyev, Victor A. 

On the linear theory of micropolar plates
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 4, S. 242-256

Altenbach, Holm;  Brigadnov, Igor A.;  Naumenko, Konstantin 

Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 10, S. 823-832

Altenbach, Holm 

Some remarks on the paper "A unified tensor approch to the analysis of mechanical systems" by A. A. Fogarsy and M. R. Smith
In: Proceedings of the Institution of Mechanical Engineers. - Los Angeles, Calif. [u.a.] : SageProceedings of the Institution of Mechanical Engineers / C, Bd. 223.2009, S. 143-155

Eremeyev, Victor;  Altenbach, Holm;  Morozov, Nikita F. 

O vlijanii poverchnostnogo natjaženija na ėffektivnuju žestkostʹ nanorazmernych plastin
In: Doklady Akademii Nauk // Rossijskaja Akademija Nauk. - Moskva : Nauka, Bd. 424.2009, 5, S. 618-620

Eremeyev, Victor;  Altenbach, Holm;  Morozov, Nikita F. 

The influence of surface tension on the effective stiffness of nanosize plates
In: Doklady physics. - New York, N.Y : Pleiades Publ, Bd. 54.2009, 2, S. 98-100

Kolupaev, Vladimir A.;  Bolchoun, Alexandre G.;  Altenbach, Holm 

Aktuelle Trends beim Einsatz von Festigkeitshypothesen
In: Konstruktion. - Düsseldorf : Springer-VDI-Verl, Bd. 61.2009, 5, S. 59-66

Kröner, Carsten;  Altenbach, Holm;  Naumenko, Konstantin 

Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 45.2009, 3, S. 249-256

Kröner, Carsten;  Altenbach, Holm;  Naumenko, Konstantin 

Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 45.2009, 3, S. 367-378

Naumenko, Konstantin;  Altenbach, Holm;  Gorash, Yevgen 

Creep analysis with a stress range dependent constitutive model
In: Archive of applied mechanics. - Berlin : Springer, Bd. 79.2009, S. 619-630

Dissertation
Becker, Florian;  Altenbach, H. [Gutachter];  Kolling, S. [Gutachter] 

Entwicklung einer Beschreibungsmethodik für das mechanische Verhalten unverstärkter Thermoplaste bei hohen Deformationsgeschwindigkeiten
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2009; Online-Ressource (110 S. = 13,03 mb)

Spannaus, Paul;  Altenbach, Holm [Gutachter];  Brandmeier, Thomas [Gutachter] 

Körperschallentstehung im Fahrzeugcrash - ein Beitrag zur Verbesserung der Unfallerkennung
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2009; Online-Ressource (VIII, 106 S.): graph. Darst., Ill.

Konferenz/Aufsatz
Altenbach, Holm;  Eremeyev, Victor A. 

A new model for viscoelastic plates made of FGMS
In: Full text of papers // International Conference on Computational Modelling and Advanced Simulations, CMAS 2009, June 30 - July 3, 2009, Bratislava, Slovakia. - Bratislava, S. 1-10

Altenbach, Holm;  Naumenko, Konstantin;  Gorash, Yevgen 

Creep analysis for a wide stress range based on stress relaxation experiments
In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008. - Singapore [u.a.] : World Scientific, S. 41-46, 2009

Altenbach, Holm;  Kolupaev, Vladimir A. 

Fundamental forms of strength hypotheses
In: Proceedings of XXXVII Summer School-Conference \"Advanced Problems in Mechanics\", APM \'2009. - St. Petersburg, S. 32-45

Altenbach, Holm;  Eremeyev, Victor 

On the time-dependent behavior of FGM plates
In: Advances in strength of materials. - Stafa-Zurich [u.a.] : ttp, Trans Tech Publ., S. 63-70, 2009

Altenbach, Holm;  Kolupaev, Vladimir A. 

The equivalent stress concept past, present and future
In: Macro-to-nano-scale inelastic of materials. - Fulton, Md. : NEAT Press, S. 88-90, 2009

Eremeyev, Victor;  Altenbach, Holm 

Configurational forces in the theory of two-phase plates
In: IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics. - Dordrecht [u.a.] : Springer, S. 121-130, 2009

Eremeyev, Victor;  Altenbach, Holm 

On the eigenfrequencies of an ordered system of nanoobjects
In: IUTAM Symposium on Modelling Nanomaterials and Nanosystems. - [Dordrecht] : Springer, S. 123-132, 2009

Kolupaev, Vladimir A.;  Altenbach, Holm 

Anwendung der Unified Strength Theory (UST) von Mao-Hong Yu auf unverstärkte Kunststoffe
In: 12. Tagung Problemseminar \"Deformation und Bruchverhalten von Kunststoffen\". - Merseburg, S. 1-8, 2009

Kolupaev, Vladimir A.;  Bolchoun, A.;  Altenbach, Holm 

Unified representation and evaluation of the strength hypotheses
In: Proceedings // 12th International Conference on Fracture. - Ottawa : NRCanCANMET, 2009., S. 1-10

Kozhar, Sergii;  Regener, Doris;  Altenbach, Holm 

Ermüdungsverhalten von AlSi12CuNiMg unter niederzyklischer Beanspruchung bei erhöhter Temperatur
In: Fortschritte der Kennwertermittlung für Forschung und Praxis. - Düsseldorf : Stahleisen, S. 163-167, 2009 ; Kongress: Tagung Werkstoffprüfung; (Bad Neuenahr) : 2009.12.03-04

Naumenko, Konstantin;  Altenbach, Holm 

Modeling of stress range dependent creep and damage for the structural analysis
In: Creep & fracture in high temperature components. - Lancaster, Pa. : DEStech Publ., S. 974-984, 2009

2008

Artikel in Zeitschrift
Altenbach, Holm;  Eremeyev, Victor A. 

Analysis of the viscoelastic behavior of plates made of functionally graded materials
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 88.2008, 5, S. 332-341

Altenbach, Holm;  Eremeyev, Victor A. 

Direct approach-based analysis of plates composed of functionally graded materials
In: Archive of applied mechanics. - Berlin : Springer, Bd. 78.2008, S. 775-794

Altenbach, Holm;  Eremeyev, Victor A. 

On the constitutive inequalities and acceleration waves in micropolar media
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH, Bd. 8.2008, 1, S. 10417-10418

Altenbach, Holm;  Brigadnov, Igor A.;  Eremeyev, Victor A. 

Oscillations of a magneto-sensitive elastic sphere
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 88.2008, 6, S. 497-506

Altenbach, Holm;  Gorash, Yevgen;  Naumenko, Konstantin 

Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges
In: Acta mechanica. - Wien : Springer, Bd. 195.2008, S. 263-274

Sukiasov, Vladimir;  Altenbach, Holm;  Naumenko, Konstantin 

Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 72.2008, S. 183-191

Konferenz/Aufsatz
Altenbach, Holm;  Eremeyev, Victor A. 

Effective properties of plates made from functionally graded materials
In: Nonlinear dynamics of composite and smart structures. - Lublin, S. 67-70, 2008

Altenbach, Holm;  Eremeyev, Victor A. 

On the application of Zhilin's theory of simple shells to plates made of functionally graded materials
In: Proceedings of the XXXVI Summer School \"Advanced Problems in Mechanics\", APM \'2008. - St. Petersburg, S. 8-49

Altenbach, Holm;  Meenen, Johannes 

On the different possibilities to derive plate and shell theories
In: IUTAM Symposium on Relations of Shell, Plate, Beam, and 3D Models. - [New York] : Springer, S. 37-47, 2008

Monografiebeitrag
Altenbach, Holm 

Analysis of homogeneous and non-homogeneous plates
In: Lecture notes on composite materials. - [New York, NY] : Springer, S. 1-36, 2008

Altenbach, Holm;  Naumenko, Konstantin;  Renner, Barbara 

Fiber rotation motion in homogeneous flows
In: Micro-macro-interactions. - Berlin [u.a.] : Springer, S. 133-142, 2008

2007

Artikel in Zeitschrift
Altenbach, Holm 

In memory of Pavel Andreevich Zhilin
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 87.2007, 2, S. 79-80

Altenbach, Holm;  Naumenko, Konstantin;  Pylypenko, Sergeii;  Renner, Barbara 

Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 87.2007, 2, S. 81-93

Altenbach, Holm;  Naumenko, Konstantin;  Gorash, Yegvgen 

Numerical benchmarks for creep-damage modeling
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH, Bd. 7.2007, S. 4040021-4040022, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/121371335/PDFSTART

Altenbach, Holm;  Fedorov, Victor A. 

Structural elastic and creep models of a UD composite in longitudinal shear
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 43.2007, 4, S. 289-298

Altenbach, Holm;  Fedorov, Victor A. 

Strukturnye modeli uprugosti i polzucesti odnonapravlennogo kompozita pri prodol'nom sdvige
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 43.2007, 4, S. 437-448

Konferenz/Aufsatz
Altenbach, Holm;  Bolchoun, Alexander;  Kolupaev, Vladimir A. 

Modelling principles for spatial material behaviour
In: Proceedings // 8th International Conference on Multiaxial Fatigue and Fracture, 2007, S. 1-8

Altenbach, Holm;  Bolchoun, Alexander;  Kolupaev, Vladimir 

Models for spatial mechanical behaviour on non-reinforced thermoplastics
In: Tagungsskript // 11. Problemseminar "Deformation und Bruchverhalten von Kunststoffen". - Merseburg : Institut für Polymerwerkstoffe e.V. an der Martin-Luther-Universität Halle-Wittenberg, 2007, S. 316-323

Altenbach, Holm;  Kolupaev, Vladimir A. 

On the unified representation of models for isotropic material behavior
In: Proceedings of 9th International Symposium on Plasticity and Impact Mechanics, Implast 2007. - Bochum : Univ. Press, S. 351-360

Altenbach, Holm;  Kolupaev, Vladimir A. 

Potential based phenomenological models of the inelastic material behaviour
In: Plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, 2007, S. 244-246

Monografie
Naumenko, Konstantin;  Altenbach, Holm 

Modeling of creep for structural analysis - with 5 tables
In: Berlin [u.a.]: Springer, 2007. - XII, 220 S.: zahlr. graph. Darst. - (Foundations of engineering mechanics) ; Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications

Monografiebeitrag
Altenbach, Holm;  Naumenko, Konstantin 

Long term creep analysis of pipe bends in a steam transfer line at elevated temperature
In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2. - Stafa-Zürich [u.a.] : Trans Tech Publ., 2007, S. 795-802

Altenbach, Holm;  Eremeyev, Victor 

Ob izgibe plastinok iz gradientnych materialov
In: Sovremennye problemy mechaniki splosnoj sredy ; T. 1. - Rostov-na-Donu : CVVR, 2007, S. 28-33

2006

Artikel in Zeitschrift
Altenbach , Holm;  Naumenko, Konstantin;  Pylypenko, S.;  Renner, Barbara 

Ausrichtung von Partikeln in stationären Strömungsfeldern
In: Proceedings in applied mathematics and mechanics . - Weinheim [u.a.] : Wiley-VCH, Bd. 6.2006, S. 423-424, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/114078368/PDFSTART!

Altenbach, Holm;  Naumenko, Konstantin 

A note on transversely-isotropic invariants
In: Zeitschrift für angewandte Mathematik und Mechanik . - Weinheim : Wiley-VCH, Bd. 86.2006, 2, S. 162-168

Altenbach, Holm;  Naumenko, Konstantin;  Pylypenko, Sergiy;  Renner, Barbara 

On the free particle rotation in a polymer melt
In: Strojnícky casopis . - Bratislava, Bd. 57.2006, 2, S. 112-126

Radusch, Hans-Joachim;  Kies, Torsten;  Altenbach, Holm;  Naumenko, Konstantin 

Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen
In: Zeitschrift Kunststofftechnik . - München : Hanser, Bd. 2.2006, 6, S. 1-21, unter URL: http://www.kunststoffe.de/directlink.asp?WAK060603

Shutov, A. V.;  Altenbach, Holm;  Naumenko, Konstantin 

Steady-state creep analysis of pressurized pipe weldments by perturbation method
In: International journal of solids and structures . - New York, NY [u.a.] : Elsevier, Bd. 43.2006, S. 6908-6920

Herausgeberschaft
Holzmann, Günther;  Dreyer, Hans-Joachim;  Faiss, Helmut;  Altenbach, Holm;  Meyer, Heinz;  Schumpich, Georg 

Festigkeitslehre - mit 15 Tabellen, 104 Aufgaben und 135 Beispielen mit Lösungen
In: Wiesbaden: Teubner, 2006. - XIV, 382 S.: Ill., graph. Darst.

Konferenz/Aufsatz
Altenbach, Holm 

Advanced engineering creep analysis of structural elements
In: Summer School Advanced Problems in Mechanics <34, 2006, Sankt-Peterburg> : Proceedings of the XXXIV Summer School &amp;amp;amp;amp;amp;amp;quot;Advanced Problems in Mechanics&amp;amp;amp;amp;amp;amp;quot;, APM \'2006 . - St. Petersburg : Russian Akad. of Sciences, ISBN 5-9888300-9-9, S. 15-32

Altenbach, Holm;  Naumenko, Konstantin 

Creep modeling and long term structural analysis of plates and shells
In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity &amp;amp;amp;amp;amp;amp; viscoplasticity, and metal forming ; proceedings of Plasticity \'06, the Twelfth International Symposium on Plasticity and its Current Applications . - Fulton, Md. : NEAT Press, ISBN 0-9659463-6-3, 2006, S. 580-582

Altenbach, Holm 

Failure criteria for composites - current state and future trends
In: Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials <2005, Kazimierz Dolny> : IUTAM Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials . - Dordrecht : Springer, ISBN 1-402-04565-4, 2006, S. 285-292

Altenbach, Holm 

Multiscale computational FEM-based engineering approach to modelling of damping behavior of CNT-reinforced composite materials
In: Fracture of nano and engineering materials and structures; Proceedings: . - Dordrecht [u.a.] : Springer, 2006, S. 1-23

Altenbach, Holm 

On the contributions of P. A. Zhilin to the shell theory
In: Summer School Advanced Problems in Mechanics <34, 2006, Sankt-Peterburg> : Proceedings of the XXXIV Summer School &amp;amp;amp;amp;amp;amp;quot;Advanced Problems in Mechanics&amp;amp;amp;amp;amp;amp;quot;, APM \'2006 . - St. Petersburg : Russian Akad. of Sciences, ISBN 5-9888300-9-9, S. 1-14

Altenbach, Holm;  Kolupaev, V. A. 

On the principles of description of non-classical creep behaviour
In: Volume of abstracts // 35th Solid Mechanics Conference, 35th SolMech 2006, Kraków, September 4 - 8, 2006 . - Warszawa, S. 117-118

Altenbach, Holm;  Moneke, Martin;  Kolupaev, Vladimir A. 

Phenomenological material models for non-reinforced thermoplastics
In: International Conference on Deformation, Yield and Fracture of Polymers <13, 2006, Kerkrade> : Book of abstracts // DYFP 2006, 13th International Conference on Deformation, Yield and Fracture of Polymers . - Eindhoven : Materials Technology Group, Eindhoven University of Technology, S. 219-222

Altenbach, Holm;  Naumenko, Konstantin 

Power plant component design using creep-damage analysis
In: Proceedings of 2006 ASME International Mechanical Engineering Congress &amp;amp;amp;amp;amp;amp; Exposition . - New York : ASME, ISBN 0-7918-3790-4, S. 1-10

2005

Artikel in Zeitschrift
Altenbach, Holm;  Naumenko, Konstantin 

Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva
In: Vestnik Nacional\'nogo Techniceskogo Universiteta \"ChPI\". - Char\'kov : Univ., 2005, S. 57-66

Altenbach, Holm 

Continuum mechanics approach and comutational modelling of submicrocrystalline and nanoscale materials
In: Fullerenes, nanotubes and carbon nanostructures. - New York, NY [u.a.] : Marcel Dekker, Bd. 13.2005, S. 313-329

Altenbach, Holm 

Nichtklassische Modellierungskonzepte für ebene Flächentragwerke
In: Naucni trudove // Rusenski Universitet \"Angel K°ancev\". - Ruse, Bd. 44.2005, S. 743-746

Altenbach, Holm;  Naumenko, Konstantin 

On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics
In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339

Naumenko, Konstantin;  Altenbach, Holm 

A phenomenological model for anisotropic creep in a multipass weld metal
In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819

Renner, Barbara;  Altenbach, Holm;  Naumenko, Konstantin 

Numerical treatment of finite rotation for a cylindrical particle
In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin 

Modelling of anisotropic creep in a multi-pass weld metal
In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387

Monografiebeitrag
Altenbach, Holm;  Naumenko, Konstantin;  Zhilin, Pavel A. 

A direct approach to the formulation of constitutive equations for rods and shells
In: Shell structures. - London [u.a.] : Taylor &amp;amp;amp;amp;amp;amp; Francis, 2005, S. 87-90

Altenbach, Holm 

Modelling of anisotropic behavior in fiber and particle reinforced composites
In: Multiscale modelling of damage and fracture processes in composite materials. - Wien [u.a.] : Springer, 2005, S. 1-62

Rezension
Altenbach, Holm 

Chemo-mechanical couplings in porous media geomechanics and biomechanics: Wien [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 3, S. 221

Altenbach, Holm 

Cosserat theories: shells, rods, and points : Dordrecht [u.a.] : Kluwer, 2000
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 4, S. 303

Altenbach, Holm 

Engineering damage mechanics: ductile, creep, fatigue and brittle failures : Berlin [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 11, S. 792

Altenbach, Holm 

Formeln und Aufgaben zur technischen Mechanik, Band 3: Berlin [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 12, S. 895

Altenbach, Holm 

Höhere Mathematik für Naturwissenschaftler und Ingenieure: München : Spektrum Akad.-Verl., 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 4, S. 304

Altenbach, Holm 

Mechanics and thermomechanics of rubberlike solids: Wien [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 7, S. 489

Altenbach, Holm 

Micropolar theory of elasticity: Berlin [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 1, S. 75

Altenbach, Holm 

Multi-scale modelling for structures and composites: Dordrecht [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 10, S. 720

Altenbach, Holm 

Plasticity: a treatise on finite deformation of heterogeneous inelastic materials : Cambridge [u.a.] : Cambridge Univ. Press, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 8, S. 556

Altenbach, Holm 

Theory of elasticity: Berlin [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 121, S. 903

Altenbach, Holm 

Theory of metal forming plasticity: Berlin [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 2, S. 131

Altenbach, Holm 

Trends in nanoscale mechanics: analysis of nanostructured materials, and multi-scale modeling : Dordrecht [u.a.] : Kluwer, 2003
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 3, S. 188

2004

Artikel in Zeitschrift
Altenbach, Johannes;  Altenbach, Holm;  Naumenko, Konstantin 

Edge effects in moderately thick plates under creep damage conditions
In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263

Naumenko, Konstantin;  Altenbach, Holm 

Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin 

Boundary layer in a moderately thick plates under creep-damage conditions
In: Proceedings of the 2004 International Conference on Computational &amp;amp;amp;amp;amp;amp; Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116

Altenbach, Holm 

Simulation of the material behavior from the engineering point of view : classical approaches and new trends
In: Computational materials science. - Berlin [u.a.] : Springer. - 2004, S. 235-257

Altenbach, Holm 

The Theory of simple elastic shells
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 1-12

Holweg, Karsten;  Brandt, Jörg;  Bierögel, Christian;  Grellmann, Wolfgang;  Altenbach, Holm 

Schädigungscharakterisierung der Implantat-Knochen-Grenzfläche
In: Grenzflächen bei Implantaten. - Berlin : DVM, 2004, S. 9-17

Naumenko, Konstantin;  Altenbach, Holm 

Shell and solid type finite element analysis of creep in thin-walled structures
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176

Monografie
Altenbach, Holm;  Altenbach, Johannes;  Kissing, Wolfgang 

Mechanics of composite structural elements : with 23 tables
In: Berlin [u.a.] : Springer, 2004. - XVIII, 468 S. : graph. Darst.. - (Engineering online library)

Rezension
Altenbach, Holm;  Achenbach, Jan D. 

Achenbach, Jan D., Reciprocity in elastodynamics : Cambridge [u.a.] : Cambridge Univ. Press, 2003
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 775

Altenbach, Holm;  Dankert, Jürgen;  Dankert, Helga 

Dankert, Jürgen; Dankert, Helga, Technische Mechanik : Statik, Festigkeitslehre, Kinematik/Kinetik : Stuttgart [u.a.] : Teubner, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 775

Altenbach, Holm;  Hagedorn, Peter 

Hagedorn, Peter, Technische Mechanik, Band 1 - 3 : Frankfurt am Main [u.a.] : Deutsch, 2003
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 774

Altenbach, Holm;  Kassner, Michael E.;  Perez-Prado, Maria-Teresa 

Kassner, Michael E.; Perez-Prado, Maria-Teresa, Fundamentals of creep in metals and alloys : Amsterdam [u.a.] : Elsevier, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 775-776

2003

Artikel in Zeitschrift
Altenbach, Holm;  Naumenko, Konstantin 

A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions
In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570

Altenbach, Holm;  Dyogtyev, Oleksandr;  Naumenko, Konstantin 

Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213

Altenbach, Holm;  Naumenko, Konstantin 

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics
In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234

Altenbach, Holm;  Naumenko, Konstantin 

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352

Altenbach, Holm 

Teorija polzucesti - aktual'nye problemy i prilozenija
In: Prikladnaja mechanika. - Kiev : Izd. Naukova Dumka. - Bd. 39.2003, 6, S. 3-33

Altenbach, Holm 

Topical problems and applications of creep theory
In: International applied mechanics. - New York, NY [u.a.] : Consultants Bureau. - Bd. 39.2003, 6, S. 631-655

Herausgeberschaft
Altenbach, Holm;  Becker, Wilfried 

Modern trends in composite laminates mechanics : [lecture material that was presented in a five-day course on "Modern Trends in Composite Laminates Mechanics" held from July 22 to 26, 2002 at CISM (International Centre for Mechanical Sciences) in Udine, Italy]
In: Wien [u.a.] : Springer, 2003. - 294 S. : Ill., graph. Darst.. - (CISM courses and lectures ; 448)

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin;  Zhilin, Pavel A. 

A micro-polar theory for binary media with application to flow of fiber suspensions
In: Proceedings of the XXX Summer School \"Advanced Problems in Mechanics\", APM \'2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62

Altenbach, Holm 

A unified phenomenological limit state criterion for ductile and brittle materials
In: Plasticity and impact mechanics. - New Delhi : Phoenix Publ. House. - 2003, S. 42-51

Altenbach, Holm 

On the application of anisotropic creep models to the analysis of thin plates
In: Dislocations, plasticity and metal forming. - Fulton, Md. : NEAT Press. - 2003, S. 118-120

Altenbach, Holm;  Naumenko, Konstantin 

On the predictions of fiber orientation and elastic properties of injection molded-walled parts
In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21

Monografiebeitrag
Altenbach, Holm 

On the extension of creep-damage theories for isotropic materials to the case of anisotropic materials
In: Anisotropic behaviour of damaged materials [based on the keynote lectures delivered during the International Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Kraków-Przegorzaly, Poland, September 9 - 11, 2002]. - Berlin [u.a.] : Springer. - 2003/chapter 8

Altenbach, Holm 

Single layer modelling and effective stiffness estimations of laminated plates
In: Modern trends in composite laminates mechanics. - Wien [u.a.] : Springer. - 2003, S. 1-68

Kooperationen
  • Prof. Konstantin Naumenko (OvGU, IFME)
  • Prof. Franziska Scheffler (OvGU, Institut für Chemie)
  • Prof. Thorsten Halle (OvGU, IWF)
  • Prof. Michael Scheffler (OvGU, IWF)
  • Prof. Andreas Öchsner, Griffith University, Gold Coast, Queensland, Australia
  • Mechanical Engineering Department, College of Engineering and Technology, Jimma University, Jimma, Ethiopia
  • Volkswagen AG, Wolfsburg
  • Prof. Dr. Rene Androsch (MLU Halle-Wittenberg, Zentrum für Ingenieurwissenschaften)
  • Prof. Dr. Mario Beiner (MLU Halle-Wittenberg, Institut für Chemie & Fraunhofer IMWS)
  • Prof. Henrik Stolarski
  • Jun.-Prof. Manja Krüger (OvGU, IWF)
  • Prof. Elisabetta Gariboldi (Politecnico Milano)
  • Prof. Thomas Seifert (Hochschule Offenburg)
  • Prof. Eckehard Specht (OvGU, ISuT)
  • MTU Aero Engines
  • Prof. Ev
  • Prof. Albrecht Bertram
  • Jun.-Prof. Daniel Juhre (OvGU, IFME)
  • Prof. Albrecht Bertram (OvGU, IFME)
  • Prof. Gerald Warnecke (OvGU, Institut für Analysis und Numerik)
  • Prof. Lutz Tobiska (OvGU, Institut für Analysis und Numerik)
  • Prof. Evangelos Tsotsas (OvGU, Thermische Verfahrenstechnik)
  • Prof. Dominique Thvenin (OvGU, ISuT)
  • BorgWarner Turbo Systems Engineering GmBH, Kirchheimboladen
  • Prof. Victor A. Eremeyev
  • Prof. Anton M. Krivtsov (St. Petersburg State Polytechnical UNiversity)
  • Trilaterales Seminar
  • Prof. Samuel Forest (Paris, Ecole de Mines)
  • Prof. K. Naumenko, DI A. Kutschke
Profil
Technische Mechanik
  • Strukturmechanik (Platten, Schalen, dünnwandige Bauteile)
  • Kontinuumsmechanik/Materialtheorie
  • Strukturmechanik (Laminat- und Sandwichstrukturen)
  • Kriechmechanik
  • Schädigungsmechanik
  • Spritzgusssimulation
  • kurzfaserverstärkte Kunststoffe und Bauteile
  • Gradientenwerkstoffe
Service
Festigkeitsbewertung von dünnwandigen Bauteilen
Kriechmechanische Analyse
Simulation von kurzfaserverstärkten Kunststoffen und Bauteilen
Vita
1974 - 1980
Leningrad Polytechnic Institute, Faculty of Physics and Mechanics

1980
Diploma (approx. MSc) in "Dynamics and Strength of Machines (Diploma Thesis: Stability of a Three-layered Strip, Final Grade: With Distinction)

1980 - 1995
Otto von Guericke University Magdeburg: Assistant, Senior Assistant

1983
Leningrad Polytechnic Institute: Candidate of Engineering Sciences (Dr.-Ing., approx. PhD) - A Timoshenko-type Theory for Inhomogeneous in the Thickness Direction Elastic Shells (Supervisor Prof. Dr. V.A. Pal'mov)

1984
Facultas docendi in "Engineering Mechanics" at the Magdeburg University, Faculty of Mechanical Engineering

1987
Leningrad Polytechnic Institute: Doctor of Engineering Sciences (Dr.sc.techn., Habilitation) - The Direct Approach in the Theory of Viscoelastic Shells

1992
Krupp-Award (Visiting Scientist at the Ruhr-University Bochum, Faculty of Civil Engineering)

1993
Privatdocent (approx. Lecturer) at the University of Magdeburg

1995
Appointment at the Lausanne Polytechnic (Switzerland) - Professorship in Structural Mechanics

1995
Außerplanmäßiger Professor at the University of Magdeburg

1995
Appointment at the Martin Luther University Halle-Wittenberg - Professorship in Engineering Mechanics

1991 - 1996
Visiting Professor at the Kharkov Polytechnic Institute (Ukraine, 1991, 1996), at the University of Technology Bratislava (1993, Slovakia) and at the University of Technology Riga (1995, Latvia)

1996 - 2011
Full Professor (C4) at the Martin Luther University Halle-Wittenberg

1997 - 1998
Acting Director of the Institute of Materials Science at the University Halle-Wittenberg

1998 - 2000
Vice-Dean of the Faculty of Engineering Sciences at the University Halle-Wittenberg

2000 - 2006
Dean of the Faculty of Engineering Sciences

2006 - 2011
Acting Director of the Centre of Engineering Sciences (Faculty status)

2003
Gold Medal of the Faculty of Mechanical Engineering, University of Technology Lublin

2004 - 2015
Managing Editor of the Journal of Applied Mathematics and Mechanics (ZAMM)

2004
Semko Medal (National University of Technology "Kharkiv Polytechnic Institute")

2005 - to date
Editor-in-Chief of the Journal of Applied Mathematics and Mechanics

2008
Doctor honoris causa (Dr.h.c.) at the National Technical University "Kharkov Polytechnic Institute

2011- to date
Advisory Editor of the journal Continuum Mechanics and Thermodynamics

2011 - to date
Full Professor (C4) at the Otto-von-Guericke-University Magdeburg

2011
Fellow of the Japanese Society for the Promotion of Sciences (visiting scientist at Nagoya university)

2014
Doctor honoris causa (Dr.h.c.) at the Ovidius University Constanta (Romania)

2015 - to date
Acting Director of the Institute of Mechanics at the Magdeburg University

2015 - to date
Associate Editor of the journal Mechanics of Composite Materials

2015
Professor at St. Petersburg State Polytechnic University Peter the Great

2016
Professor at St. Petersburg State Polytechnic University Peter the Great

2016
Visiting Professor at Griffith University (Gold Coast, Queensland, Australia)

2016
Doctor honoris causa (Dr.h.c.) at the Vekua Institute, University Tbilisi (Georgia)

2017
Visiting Professor at Griffith University (Gold Coast, Queensland, Australia)

since 2017
Member of the Flying Faculty (Mechanical Engineering) at the Vitnamese-German University
Presse
Die Technische Mechanik ist heute mehr ein Querschnittsgebiet, welches u.a. in enger Verbindung zur Werkstoffwissenschaft Modelle des Werkstoffverhaltens in eine für den Computer verständlich Form bringt. Strukturen, Bauteile etc. werden anschließend bezüglich ihres Spannungs-Verformungsverhaltens auf der Basis kommerzieller Software unter Berücksichtigung der formulierten Konstitutivgesetze analysiert. Dabei ist insbesondere das Grenzverhalten zu bewerten. Aufgaben der Technischen Mechanik sind heute oftmals Mehrfeldprobleme. Neben mechanischen Effekten sind thermische, elektrische, magnetische Effekte einzubeziehen. Ursprünglich auf Festkörper beschränkt werden heute die Grenzen insbesondere zur Strömungsmechanik (Rheologie) überschritten. Daher spricht man auch oftmals von einem kontinuumsmechanischen Zugang.

Letzte Änderung: 28.08.2017 - Ansprechpartner:

Sie können eine Nachricht versenden an: Webmaster
Sicherheitsabfrage:
Captcha
 
Lösung: